Search results for query: *

Hi all, my customer is using an old application without keep alive feature. The protocol is TCP 9999 and it is use one central destination Server-IP. The Problem with ASA 5580: If an user is creat a session to the server and no datas will be sent for next 10 min, the session is auto closed...

Hi @ all, my Catalyst 3750E logs frequently the message bellow: %SFF8472-5-THRESHOLD_VIOLATION: Te1/0/1: Temperature high warning; Operating value: 30.1 C, Threshold value: 0.0 C. The joke is that the threshold value is 0.0 C. On other switches i did´nt get these message on Te Ports...

Hi All, i dont understand the ASA-Logging Feature. I disable the logging feasture on any firewall rule but the logging runs futher with all kinds of messages. I want to log only the deny rules on my policy and not more of these. Is it possible? i think i need an explanation of this logging...

Hi my access layer with Catalysts 3750E switches execeeds the limit of 128 PVST STP instances. (140 Vlans in use now) Now i would to reconfigure my Spanning-Tree from PVST to MST. Question: to save further other vlans agains loops and co, is it possible to configure more than 128 MST-Groups...

Hi, is it possible to configure more than one vtp domains in the same core-sw? (Cat 6509) Maybe with a new IOS and new hardware? It would be great to configure 2 vtp domains on the same device. I need this as security feature. THX

Hi all, is the ASA500series able to work (featureset) with proxysets? Im looking for a firewall with proxyfeatures for manual proxyport definition. (Proxy for HTTP, Telnet , FTP etc). When not...who can make suggestions for other kind of products. THX

Hi all, follow topology in attachment. The Vlan 1 is build with unmanaged switches. (this means no spanning-tree is possible). If in V1 a loop is produce, the managed switch and the router get an high utilization. This means the other network vlan 20 cant work too about the router in direction...

Hi @ all, I tried to configure SNMPv3 on a Cisco Router with SNMPv3 auth. (Image is correct with k9) Config: snmp-server group admingroup v3 auth read test snmp-server user admin v3 auth md5 test This debug output is displayed on the Router after a request from Mgmt-System...

HI @ all, is it possible to create a class-map for Bandwidth management on cat3750? i want to configure the follow: PC1 and PC2 (10.1.1.1 and 2) on SW1 should get 100% bandwidth traffic from switchport if they connect a destination (2.2.2.2) BUT If PC1 and PC2 (10.1.1.1 and 2)connect to...

HI, i have some probs bto understand the ASA-System I configured 2 Zones: Zone A (incoming) SecurityLevel with 100% Zone B (incoming) SecurityLevel with 50% If i establish a connection from ZoneA to ZoneB, the ASA will not take a look in the own Policytabel cause the Zone A with 100% is...

In this Example : HSRP configuration for DLS1: DLS1# config t Enter configuration commands, one per line. End with CNTL/Z. DLS1(config)# ip routing DLS1(config)# interface vlan 1 DLS1(config-if)# standby 1 ip 172.16.1.1 DLS1(config-if)# standby 1 preempt DLS1(config-if)# standby 1 priority 150...

Moin, i configured both router for a leased-line connection about 128kb/s (it should be use both B-Chanals (Europe-bundle ISDN)for transmitting) Problem: sporadically the connection breaks down. I use the line for a digital phone (about ethernet) which should connectto the TK...

Hi @ all, i want to configure my passport with follow features: 1.) The PP8600 should include static route informations in the RIP-Updates for other adjacencys I want to configure it about the device-manager. i thnink the first step is: 1.) configure a L2/L3 policy 2.) set the policy to...

Hiiii @ all, it is a funny question but yesterday i couldnt find it on the PP8100 System. A static default route nor a vlan default gateway was possible to configure on it. Can anybody help me ? I need a default gateway to connect the device about the routing. Info: The PP8100 hast...

Hi folks, can anybody help me ? Is 802.1w with a new Bossversion supported ?? THX

Hi, i want to configure a voip QoS system on two Bay 5520 and a passport 8600. The topology is the i want to phone from one 5520 about the pp8600 to the second bay 5520. I have configured one voice vlan and one data vlan. My plan: I want to configure L3 QoS (DSCP). The Bay5520 must take a...

Hi @ all, knows someone an issue about MLT-configuration between a R-IO Moduls and E IO Modul ? My Problem is that i cant configure a MLT between the two types of IO-Moduls in one chassi. The Passport is running under two: 8692 SF an mixture of R and E - Moduls and software 4.0.6.0....

Hi @ all, Is the Passport CPU 8690SF with 256 MB (Memo Upgrade) and a higher Softwarerelease as 3.7.11.0 compatible ? I want to work with one 8690 SF CPU in a chassi. The reason of my question is because i need IST/SMLT configuration with the 8690SF. Is that possible or has the cpu-modul a...

Hi @ all, the last time, i get a much hardware issues with SFP-Gbics and Bay 380 24F. In the last 6 Month, i got 8 of 11 SFP Gbics back with no further functions in Bay380-24F. i telnet of BayStack produce follow message: SW Version.: 3.0.1.04 Information of Hardware: Vendorname: E20...

Hi all, When i have a opened Telnet connection to a passport 8600, i want to switch from master to slave cpu for administrating the slave cpu files about the dir command. Is that possible or do i need a console connection ?? THX