Search results for query: *

I would like to nat 3 internal addresses to 1 external. Is this possible and can someone point in the right direction on how to do it? Thanks, Jeff

Hello All, I am working to get a tunnel up. I am getting the following errors with the tunnel and it will not come up. Let me know what I am doing wrong. Set up one just like it and it works perfect. Not sure what I am doing wrong. crypto_isakmp_process_block:src:216.12.92.163...

I am tring to create a split tunnel vpn and I would like the users to only access 6 pcs on the network. Does anyone know if this can happen and also allow the users to get to the internet using their home internet? Thanks

I have a Cisco ASA 5510 I just installed and there are 3 site to site VPN's connected to it. 2 of my VPNs keep disconnecting every 10 minutes but reconnect. The 3rd stays up without any issues. Does anyone have any thought as to what I should be checking. Cisco says it is an Internet line...

I know this is a dumb question but I have to ask. I have the above switch with 48 ports and then there are 4 ports for fiber that have the numbers 45-48 does that mean I loose the four ports on the switch if I plug in fiber?

Configuration Help. I am getting ready to put in a new network with a core of 2 3750 G's stacked with 2 4948s and 3 3750Gs stacked. I am going to have multiple vlans probably 5-7. Does anyone have an idea how I should configure? This is my idea. I was going to make the core the VTP...

Hello All, I am working with a Cisco ASA device behind a Cisco 7000 router. I can get out to the Internet using the just the router but once I put in the ASA device I can ping the outside interface of the router but I can not get to the Internet. Am I missing something in the ASA? Thanks.

Does anyone have any good website for training material for the CCSP? Thanks!

I have a pix 506 running 6.1 and I have put the ssh commands into the pix. When I try to ssh to the pix it asks for username - there is none set and even when I hit enter and put in the telnet or enable password it will still not work. Am I doing something wrong?

I have put in the ssh commands but when I ssh it is asking for a username. There is none set - any ideas of how I can get into the pix using 6.1 using ssh?

I am installing a pix 506e and everything seems to be working but my server 192.168.2.5 can not get to the internet. My clients can ping to the internet but not browse the Internet. My server controls DNS but it can not reach the Internet. I can ping from the pix to the internet and I have...

I am not sure what the problem is. When I try the inside,outside command my server stops going to the internet and does not ping out either. Then I tried the outside, inside command and then all clients could get to the Internet but mail stopped. What am I missing? Below is the config...

Does anyone have an example of a site to site VPN for the above situation? I have a site in Flordia and in Calif. that I need to setup and I would like some real work examples.

I have a Cat 6509 running multiple VLANS and also routing between those VLANS. I need to add a Cat 2950 to one work group area. The switch will only be on VLAN 2. If their anything special I need to configure on the Cat 2950. The Cat 2950 will plug directly into the blade that is configured...

Attached is my config. I can get in and everything works but I can not ping anything internally on the 192.168.5.0 network. Could someone please help. PIX Version 6.3(4) interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100...

Attached is my config. I can get in and everything works but I can not ping anything internally on the 192.168.5.0 network. Could someone please help. PIX Version 6.3(4) interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100...

I need some assistance. My router lost its configuration and I can not get the tunnel to come back up. I have attached the configuration between router A and router B. Anyones help would be much appreciated. Router A Verison 12.2 service timestamps debug uptime serive timestamps log uptime...

I just got into a new job and was left with this config. I need to get the VPN working this week. Can someone help me out. I have the PIX 506E and I am trying to the 3des and VPN client 4.X Thanks, PIX Version 6.3(1) interface ethernet0 100full interface ethernet1 100full nameif ethernet0...

I just got a Pix 506E and I would like to setup VPN on the pix does anyone have a sample config I could copy and use or go by? Thanks, Jeff