Search results for query: *

HiGuys, System version Avaya cm5.2. Can I configure a station to use a specific route pattern no matter what number he dials. E.g station 1 makes oubound call and uses normal ars procedure and goes down standard route pattern 1. But station 2 makes a call and needs to route down a specific route...

I am having problems with backing up announcments using Val Manager version 3.0.12. My CM version is R013.00.1.346.0., this is a CSI. When I try to preform a backup i get the following error Mon Nov 12 13:20:24 GMT 2007 **Task: Back Up VAL Board, Task ID: 20** Could not enable filesystem on...

Hi Guys, What is the maximum number of calls that can listen to a single announcment on a VAl board. For examlpe all calls go to a announmnet and then diconnect. How many calls can listen to the announmnet simultaneously?

Hi Guys, I have a val board which has 3000 seconds left on it. When i do a cahnge announcments and try to add another announcment to this board, i get response back saying system has reached max capacity. Has any of you guys experienced this? and what was the resoloution?

Hi Guys, I am having difficulty with exporting vdn data from the ASA. I go to the advanced tab in asa and click the export tab, here i type in the vdn numbers which i want to export. I then do a run now. This has always worked until this morning. I get an error message back saying. Error...

Hi Guys Is it possible for me to have a security code on a definity phone. This is so that outbound calls can only be made by the peron who's phone it is. If a user wants to make an outbound call he enters a security which allows him to make a outbound call.Has anyone done this, or does anyone...

Hi Guys I have a link between a definity 9.5 and a mitel. When a call is placed from the definity to the mitel , the mitel phone sees the extension of the definity. When the call is placed from mitel to the definity the definity phone sees only the name of the trunk group i.e mitel link. So we...

Hi Guys, I have a med pro in a g700/s87800,version 2.1.I did a camp-on busy medpro in order to busy the med pro out gracefully.This was done to allow me to change the duplex setting on the card. Now when i do change ip-interface xxxx and try to make any changes to the board i get back error...

HI Guys Can someone please tell me where i would be able to locate the instructions for changing a ipsi board on a 2.1. Thankyou in advance.

HI GUYS Where can you lock down the port settings on a version 9.5 For example i want to lock down the c-lan to 100 full duplex. I was told to do ch ethernet. But this command does not seem to exist.

Hi Guys How does the check step in a vector work. I have a skill in a vector which if it gets busy i want to que the calls to another skill as well as bieng answerd by the skill its already qued against. I was told to do a check skill xxx. Is this the best option.

Hi guys when I try and log into my s8700 remotely via the modem I am able to put in my user name and password, when it try's to register me to the network is comes back with the following error.734 A PPP link control protocol conversation started, but terminated at the request of the remote...

Hi Guys I have 2 4620 ip phones, when they reset they ask for there passwords, when i put in the passwords, they seem to be incorrect, i then log on to the switch and do change stationxxx and the password is no longer there. Can any one help.

I have a cms version 8 running version 7 solaris. We are having problems doing backups. I removed the drivers by going into cd /dev/rmt....i then did rm 0*........then i did drvconfig.......i then did tapes. it is not picking up the drivers again. I have revooted the cms and done the drvconfig.I...