Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: huberc
  • Content: Threads
  • Order by date
  1. huberc

    Trunk Loops (Tromboning) causing blockage

    I have a private microwave trunk, 30 channel ISDN, E1 using DS1 (TN2464, TN464 boards)that connects two Definity G3SI/R6 sites that sudenly fills and blocks. When cecked most of the ports at each end are looped back to the same trunk but the next or a near port. How can identify the cause?? Any...
  2. huberc

    Recovery of encrypted files (After a system reinstall)

    A customer of mine has encrypted about 30 files and did not decrypt them prior to reinstalling the O/S (Windows XP Pro). I have followed the instructions provided by MS. IE: Login as Administrator, take ownership, create a Recovery Agent then user the Cypher command to decrypt the files, without...
  3. huberc

    CLID and E&M tie trunk

    I have a E&M tie trunk, with 3 members, conecting two sites. Calls made between these sites do not show CLID (Extension #) in the CDR records. I have set the CDR to sho clg-num/in-tac and the TAC shows OK but not the Ext. Both ends of the trunk have been programmed to send calling number, infact...
  4. huberc

    E&M Tie trunk not sending CLID

    I have a E&M tie trunk, with 3 members, conecting two sites. Calls made between these sites do not show CLID (Extension #) in the CDR records. I have set the CDR to sho clg-num/in-tac and the TAC shows OK but not the Ext. Both ends of the trunk have been programmed to send calling number, infact...
  5. huberc

    Dial Plan Record, Second Digit & UDP

    In attempting to remove "Misc" from the Dial Plan on digit 3,the system says "Second digit table must be removed first" . Attempting to remove the Second Digit Table the system says "First digits assigned in Uniform Dialing Plan; remove UDP entries" On trying to...
  6. huberc

    Payphone and ERL (Line reversal) on G3SI

    Is it possible to interface a payphone to a Definity G3SI. Payphones, as you probably know, need some find of signal (Line Reversal) by which to time calls. I guess that there are no interface boards that can do this for a G3SI ?? Living in hope !? Chris
  7. huberc

    What I meant was FRL & COR redefinition.

    Sorry, acronym overload happening!! We have 4 Definity G3SI R6.0 PABXs. I need to redefine the FRL to provide more levels of COR. I can not find where I should change the FRLs. Basicaly I want to be able to restrict extensions to one of five levels. Currently there are only three. The five...
  8. huberc

    Ghosts in the PABX!! TN754B problems ??

    One of my systems, a Definity G3si R6.0, seems to have a problem with a digital line card. The symptoms are: 1. Message light in constantly lit on some phones, even when there are no messages. 2. Phone resets to "PLEASE RESET SPKR" 5 times per day. 3. Phone dies for about 5 seconds...
  9. huberc

    FAC & COR redefinition

    We have 4 Definity G3SI R6.0 PABXs. I need to redefine the FAC to provide more levels of COR. I can not find where I should do this. Basicaly I want to be able to restrict extensions to one of five levels. Currently there are only three. The five levels I am considering are: 1. Internal +...
  10. huberc

    ARS Analysis table

    I am able to add entries to the ARS Digit Analysis Table but I cannot remove existing entries. Definity doc's give no clues as to why this is so. Any advice welcome. Chris

Part and Inventory Search

Back
Top