Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: shroud
  • Content: Threads
  • Order by date
  1. shroud

    Reach line card unable to program more than 16 Digital phones

    Attempted to program new digital phone on 17th TN port, however receiving error
  2. shroud

    H323 1616 phones unable to call out via Sip trunks

    When H323 1616 phones try to call out using short code 9N on the Sip trunks, it appears after only dialling 3 digits the call is sent out and therefore disconnected. They have a release 9.1 server edition sending calls via an Avaya SBCE to the SIP provider.. Alternately it appears if the CLID...
  3. shroud

    Avaya Communicator for windows Call log and Adhoc conference issue

    The Call log history on the communicator is empty and Adhoc conferencing not working, get error message . It mentions on Avaya documentation for conferencing the Service URI is required, however I am unable to see where this is to be entered , please can some one provide insight of what is...
  4. shroud

    Migrating IP500v2 release 7 to a IPO Server edition release 9.1

    Can you take the configuration file for a IP500v2 release 7 and import directly into a IPO Server release 9.1. Is it also possible to take a backup of Voice mail Pro mailboxes and caller applications in IP500 v2 release 7 and restore to the Server Edition Voice mail Pro. Unable to find...
  5. shroud

    Mitel 3300 MXE T1/E1 with Dual Inband Loopback card Part number/SPECS

    We have just taken over our First Mitel 3300 customer .Can anyone help in providing the part number for the above card and provide any description/specifications..is this a dual T1/E1 card, I can see 2 ports?
  6. shroud

    CS1000B release 5 upgrade to 7.65 ?

    We have a customer upgrading the main office CS1K system to 7.65 , do We need to upgrade the CS1000B release 5 to 7.65 ? and if so does that mean We need to change the CS1000B to an SMG
  7. shroud

    Avaya MM 1.1 Exchange 2008

    Has anyone got a MM 1.1 working with Exchange 2008
  8. shroud

    MGC all VGW channels Disabled and unregistered

    CS1000E Rls 5 system with 3 Media Gateways 0 0, 4 0 and 4 1. MGC 4 0 is found to be up and registered as shown below, but unable to enable the VGW channels. Please can anyone advise... >ld 117 OAM000 => stat ipmg LAST REG LAST REG IPMG TYPE...
  9. shroud

    Can a Miran Card be used with PA Equipment ??

    Customer currently have a Public Announcement which they need to connect to the Nortel pabx however they do not have a Ran.Pag Card. Please can anyone advise if the PA can be connected to a Miran card so anyone on a phone can dial the access code of the Pager Trunk and relay a message via the PA...
  10. shroud

    Can a Miran card used for PA system

    Please can anyone advise if a Miran can be configured as a Pager Trunk and wired to a PA system, whereby any phone can be used to make a public announcement via dialing the acod of the pager trunk. Cheers
  11. shroud

    CAN NOT CALL OUT VIA PREMICELLS

    We have a customer with analog COT circuits to 3 Premicell boxes...however can not dial mobiles or any outgoing call via these Premicell boxes...tested using acod and performed a trace...can see call going through the COT circuit to the Premicell with dialled number..however just receive...
  12. shroud

    Nortel dpnss to Avaya problem with call forwarding

    Problem: Nortel Option 61C connected to an Avaya switch using dpnss tie trunk, when call made from extn in Avaya to extn in nortel switch, and the nortel extn is call forwarded to an external number the caller is diverted to local nortel switchboard not to external number. However, if an...
  13. shroud

    Problem on CP-PIV card on CS1000M & E Rls 4.5

    We are facing this problem on couples of site. It’s related to Cpp 4 call servers. SW rls - 4.5 CPU type - CP P4 Problem description: One of Cpp 4 stops responding after couple of days. When we reboot CPU card is comes up properly and start SYNC and becomes redundant. Systemtype: CS1000M/E ...
  14. shroud

    How to apply latest PEP list to Meridian Option 81C release 25.15

    I have the latest PEP list for a Meridian Option 81C Release 25.15 switch. Please can some one provide me with the correct steps to install them. Thanks.
  15. shroud

    Handsfree for M3902/3904 phones

    Is it possible to press the main extension Key 0 on the phone and achieve Handsfree without pressing the Speaker key..?? Cheers..!
  16. shroud

    How to activate CLID from Public Switched Network

    My Client has a Option 11C mini with q.931; EuroISDN lines connected to the Telecom Carrier. However they do not get CLID showing up on their M3904 telsets from the calling party... Any ideas..? Thanks..
  17. shroud

    Orion Series Phones for Meridian pabx

    Just wondering if anyone has come across the Orion Series Telsets for Meridians and how would you program them. I checked the overlay LD 11 and found there was no type of phone M3110 and M3820 included. However according to the Nortel Meridian Telco distributor they are in fact compatible. Thanks.
  18. shroud

    Manuals for Wyatt Dealerboards and System

    Please can anyone provide some info on the Wyatt dealerboard System. Cheers
  19. shroud

    Qsig connection between Meridian and Cisco Call manager

    Please can some one guide me in the configuration of a Qsig link between the two devices on the Meridian pabx. Would like to know what configs. in the programming need to be made from LD 17 , LD 16 and LD 15. Cheers, Shroud

Part and Inventory Search

Back
Top