Search results for query: *

I would like to have a remote system (connected via pri) utilize legend loop start trunks for some outbound calls. What parameters do I have to fill out?

I have a Legend connected to a PC running asterisk via a PRI. Certain calls coming in on a 5ess PRI are being rejected. Here is the setup telco_PRI -> Asterisk_1 -> Asterisk_2 -> Merlin_Legend_2 ...are accepted. System_75_T1 -> Asterisk_1 -> Asterisk_2 -> Merlin_Legend_2 ...are rejected when...

I'm connected to Legend 7.0 via 5ess PRI to an asterisk pbx. I am routing unanswed (both extenal & internal) calls back out through the PRI to UDP extension 6799 for voicemail - which is working fine and asterisk is capturing the called extension number. I would like to turn on the message...

I have tried a 100D T interface in slots 3 & 5. It is failing Maintenance/Slot/3or5/Demand Test/BoardCntrlr/Test Once ...while busyed-out. Is this test applicable to the 100D? Thanks, John

It seems I have a classic legend problem, as described below. Does anyone know the cause of this? My config is 5ess, esf, b8zs. Additionally, each of the b-channels except 23 come up as described. When the T is idling, supervisory frames transfer back and forth every few seconds. When I try to...

If anyone is familiar with PRI packets and can steer me in the right direction please help. I have a 100D that I have yet to have up. At one point I had outgoing calls going through (after a long delay when dialing - but one would expect this is another issue). Is this endless chatter normal...

Hi, I do the telecom for a school district. We are using the open source pbx Asterisk quite succesfully (using VoIP to route internal calls over our 100 mbs wan to connect about a dozen sites and also funnel all of the location's traffic through 2 telco PRIs. These are non-contiguous...