Search results for query: *

I know I'm asking this question in an NEC forum so I expect NEC affinity. We've had a 2000 IVS for over 10 years now. Our options to upgrade are buy a 2000 IPS on the second hand market or upgrade to a sv8300. My IT consultant's firm has become a ShoreTel vendor and made a pretty good sell...

I'm looking to find some equipment in order to build a lab to study for my CCENT and CCNA. Can anyone recommend some Cisco models that I could find on the cheap used? I'm looking for a pair or routers and a switch. I've tried the router sims and they are not the same.

So, since NetApp decided to axe the SV line and leave me with a $6000 unsupported SAN/NAS I've had a rough time tracking down drive trays. I tried kludging a tray with an off-the-shelf SATA drive, but the SV didn't like it and refused to boot ONTAP with the drive installed. The HD lights went...

I have our ancient Mitel NuPoint Messenger/Baypoint VM attached to a serial to ethernet converter. I can telnet to the machine fine, but I'm getting double carriage returns every time I hit enter key. Sames goes for the letters. The menu system is just letter-based, so if I hit (M) to modify a...

So, I had my clec port some AT&T DS0 lines to our PRI. Now, now do I port them to an extension? These numbers all have extensions of 1182,1183,1184 What I have done: CMD>760>1182>6182 CMD>10>6182 When I call I get a number is disconnected message. O_o This port was issued at 10AM yesterday and...

I have 3 1240AGs setup; one as root-bridge and the other two as clients and repeaters. About a month ago weird things started happening. Using the web admin interface, under association; each access point thinks it is associated with another static ip on the network and another MAC address...

We need a new voicemail server/system. Currently we have a Mitel NuPoint Messenger that connects to the NEAX via serial MCI. Any recommendations? We have around 75 extensions and 90 mailboxes. I've been looking at the Panasonic VM. We do not have any room in our cabinets for the NEC AD-8 or...

I'm still a little fuzzy (despite having the manual) on the dial plan CMD 200. EG: How can I lookup what *03 is in our dialing plan? Also, the option to voicecall an extension has disappeared from the triangular softkeys when ringing an extension. Thanks, D

Can anyone here explain to me how the NEAX 2000 series transfers calls to external voicemail using RS232/Serial? I want to replace our Mitel VM server with an Asterisk solution, but two things are stopping me; call transfer to voice mail and voicemail transfer to the switch. Our IVR will...

Ok, so I understand the CPE is half-duplex, right? Can I run two CPEs into a managed switch and set one for upstream and the other for downstream? Would I use spanning tree for this? Is the managed switch even necessary or would I get a feedback loop without it? Seems like our bandwidth and...

We use Mitel Nupoint Messenger with our NEAX 2000 IVS for voicemail. Is there a cheap pc-based voicemail server that will work with the NEAX? asterisk? Thanks, Derek

I'm getting this error message repeatedly in console session with NuPoint Messenger: Partition is full. Clear cdrfile /evny33 How do I clear this file and prevent future errors? What is this partition for? Thanks, Derek

I have never setup DISA on my NEC 2000 IVS I have three guys in the field using cell phones. I want a number they can call get DISA and call out on the switch using our long distance plan. that way they only pay local minutes. The manual does not seem very clear regarding this process so any...

I cannot access the CLI via telnet anymore. connected via terminal cable: enable line vty 0 15 password end write http server is not accessible either. is there a hard reset?

I need to reset my Catalyst 2950 LRE switch to the factory defaults. i cannot telnet the switch anymore. hostname: LRE ip: 192.168.0.70 default-gateway: 192.168.0.1 I definitely don't want to plug into the console everytime I need to change a setting.

I have an extension on 2000 IVS system (Dterm E series phone) that has a message waiting lamp "stuck" on. I tried: #9+extension number (6967) *9+6967 then #9+6967 CMD>1303 - 1 CMD>1303 - 0 CMD>10 - 0083 - CCC CMD>10 - 0083 - 6967 I checked the voicemail server (Mitel/Baypoint Nupoint Messenger)...

Small non-profit trying to save money. What is involved in pulling fiber. We have a raceway that our current 25 pair feeder and one ethernet run through 200' feet to the next building on site. We want fiber to that building since all other buildings are fibered already. What kind of fiber...

I was looking for an ESI users. Any ooptions, caveats, worries, pitfalls. I know next to nothing about this company.

I have one extension (6993) the has visual indication of a ring (on soft keys), but no sound. I hit Feature (0) and turned the ringer volume up and ringer sounds fine, but still no audible ring for external or internal calls to this extension. Thanks, Derek

Is there any way to tell if an analog port is in use or not? I have looked at the cards and some have a solid light and some have blinking lights. What do these mean? I know you can go CMD>10 and LENs that have an "F" preceeding them are digital and those that do not are analog. I have a...