Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: PCambas
  • Content: Threads
  • Order by date
  1. PCambas

    IP Softphone Help

    Has anyone successfully set up a soft phone on release 8.1 server edition across the public internet with no VPN. I cannot seem to get it thru the firewall to the IPO Pete Cambas ACSS/SME IP Office
  2. PCambas

    Softphones logging out

    Let me start by setting up the install. In a data center we have 1 9.1(96) server edition server primary and a secondary server running SIP trunks. The customer location is connected by a 1 Gig dedicated circuit. I have 9611G's and SIP soft phones both working off of the primary. The soft phones...
  3. PCambas

    Music On Hold Server Edition

    I have a Primary and Secondary DL120 with 8.1 (96) on each. I have uploaded the holdmusic.wav 8khz 16bit mono to opt/ipoffice/tones/mohwavdir and saved the configuration. The file is only 80 seconds long or so but the damn IP Office will not upload it. I have tried to change the tftp server and...
  4. PCambas

    voicemail issue

    IP 500 v2 running 6.1 (0504) Voicemail pro 6.1 16) Customer did an update to windows server, when you call users now, you get Welcome to IP Office, not the greeting. We moved the VM folder to a new server and rebooted THE ip Office and VM server. Problem still follows. Any ideas on what caused...
  5. PCambas

    Avaya One-X 6.1

    Is it possible to import your outlook contacts to your One-X portal contacts in release 6.1? I have the desktop assistant installed and running and would prefer not to have to install TAPI on every desktop.
  6. PCambas

    Whisper Paging

    can anyone tell me a successful short code/call flow in Voice mail pro for whisper paging in release 6.1?
  7. PCambas

    IP 412 with dual PRI card

    I have a customer with an IP 412 which we upgraded to 5.0 friday night. After the upgrade 1 of the 2 PRi's on the dual card (in slot A) did not come back. When I switch the cables, the issue follows the bad cable. The PRI vendor came out and tested clean all the way to the switch. We plugged in...
  8. PCambas

    NTLM 2

    IP Office is 500V2 running 5.0 VM Pro software level is 5.0 Trying to get generic voice mail to email to work. Keep getting error 17 on debug (failed to resolve host) Customer is using exchange 2010 with NTLM2 Authentication. Question is: Does 6.1 support 2010 exchange and NTLM 2? Will an...
  9. PCambas

    9650 rebooting

    Switch: IP500V2 Release: 6.0(18) Http Server: HFS IP Office gives out DHCP to the telephones, the HFS server houses all the files for the 16xx and 96xx phones. The 9650 will hit the HFS server, download the appropriate files and then come up and look normal. The minute the customer hits the...
  10. PCambas

    Direct to VM

    I have an IP500 V2 running 6.0(14). I used to do direct to voice mail with a short code of #xxxx Voice mail Collect "#"N With the upgrade to (.14) from (.8) The Quotes in front of the # sign disappear. I have also created a call flow in voice mail pro that does not work any more. Any one...
  11. PCambas

    9620 VPN

    Has anyone successfully set up a 9620 to VPN thru a sonic wall to an IP Office? The IP Office is running 6.0. The sonicwall is is model 210 enhanced version. I have a 5610 that works perfectly. When i set up the 9620 with the exact same settings I pass IKE 2 then get a SA Delete request. I tried...
  12. PCambas

    6.0 and conference meet me

    Does anyone know a work around for conference meet me short codes and a V2 with embedded voicemail?
  13. PCambas

    IP Office R6

    Is it possible in an R6 environment to run Voicemail Pro and One-X portal on the same machine if the specs fir the requirements?
  14. PCambas

    Twinning Issue

    Customer has ip406 running 4.2(23). When twinning is turned on the the call gets sent out but when the caller tries to answer the call is dropped on the cell phone side and the caller is sent to the twinner's voice mail box. The 406 and 30 port digital have been replaced. Anyone know of a bug...
  15. PCambas

    Multiple VPN's from same IP

    I have a sonicwall tz180 firewall set up to accept vpn connection from AVAYA telephones. The vpn is an IPSEC vpn tunnel and I have local users set up for each phone. Consistent natting is turned on in the tz180 as well. The remote appliance is just a linksys router. Wehn I connect 1 telephone...
  16. PCambas

    VPN on Watchguard X550e

    Has anyone successfully set up a vpn phone to work with a Watchguard X550e? And if so can you give me some specifics on the setup?
  17. PCambas

    upgrading

    Is there a certain pcs number that I cannot be below to upgrade to 4.1 or 4.2. This question applies to digital station modules and analog station modules not the processor.
  18. PCambas

    TAPI

    I have a IPO500 on a subnet 10.3.97.xx and the user PC's on a subnet 10.3.98.xx. All available ports have been opened between the two subnets. Howerer, When I install Tapi on the .98 subnet I cannot see the 97 Subnet. When I put the User PC on the 97 Subnet I can install Tapi No Problem and see...
  19. PCambas

    Soft Console

    With 4.1, is anyone aware of an issue with supervised transfers? When they try to do a supervised transfer it will put the call on hold and not get it back. They then have to re transfer the call to the user unsupervised. Any ideas would be great. thanks
  20. PCambas

    One Way Talk Path

    I have an IP406 running 3.0(69). There are 3 IP users programmed and sitting on the local lan. They can hear the callers but the callers cannot hear them. There are however 3 more IP Phones on a point to point 200 miles away that work fine. They are set up the same way in programming. Any Ideas?

Part and Inventory Search

Back
Top