Right now I have a G350/8300C with (15) 64xxD type sets all together in group-page #1.
If I upgrade to S8300 and IP off an Aura "core switch" using G96xx phones will I still be able to have the "group-Page" ?
Thank you in advance,
Mike in NH
I'm testing a product called SecureCTR on a Lab Windows 7 OS to see if I can get into a Merlin Messaging 3.0 . I can IP into the MMessaging now using WIN XP but Windows 7 doesn't support the 16bit Merlin Messaging Admin software and the (group) I work for doesn't allow "compatability mode" for...
Would a cold/warm start after a power failure default an active NS button ? Has anyone ever heard of this on a Merlin Legend V7 ?
Thanks for any info,
Mike
On a G350,
If my MM-711 has a LEC CO trunk coming in on port #1 can I program (3) k2500 analog extensions to ports 2,3 and 4 ? In other words, are there any restrictions or can I use the ports either as CO or extension?
Thanks in advance,
Mike
Need some advice please,
I'm going to program a 4 digit non DID extension on a Viking unit to open a gate. Only a few will have a need for this extension so I don't want it easily guessed or triggered my mistake.
Is there a way of securing it by adding a special code?
Mike in NH
Can anyone suggest why this doesn't ring or flash ?
Magix 4.0 Hybred with Merlin Messaging 4.0 (DID Flex-path PRI)all MLX stations.
Incoming calls ring at the Operator console ext.4910 before going to AA#1 If the Operator is gone there are 3 MLX stations that have cover-D buttons of 4910 and...
I'm hoping someone in our group has got this N.S. to work..
Hardware== Magix 4 key mode 3 pots lines. Merlin Meaasging 4.0
What is working right now>>> GpCall 770 is VM,, GpCall 791 has the CO lines and overflows to 770 after 7 rings (time based)
What do I have to do to add a Night Service...
I am remotely backing up a Magix 4.0 using a Socket Magix IP unit.
Near the end of the backup a pop-up says "Block Sequence Error in Xmodem" . Has anyone seen this type of error ?
Thanks in advance,
Mike NH
I'm stumped, again !
The are many posts about converting, but none that I could find using just a back-up card.
I have a customer in another state that I can't IP or dial into to get a backup on a PC. I do however have a copy of their Magix V3.0 back-up card.
Using just this 3.0...
Is it possible to reset/clear (mute/hold 73738#) a 4612 phone that is powered up but NOT connected to the LAN? I think this one has old programming and would like to clear it. I have others and they all work fine.
This is a refurbed gen#2 set right out of the box and the issue is when it's...
This is not service effecting but it kind of bugs me to keep seeing it.
I have been monitoring a non PRI T1 for a few days. It is running clean except for a consistant SLP error 041.
Verizon T1 into a CSU to Magix 4.0
Any thoughts?
Customer is having static on intercom calls, digital to analog, the analog station only hears the static.
Both carriers are grounded to building frame and the power units read OK. I established an in house intercom call and disconnected every analog station on both boards, it didn't help.
I...
I know this is an odd question but can I use a Legend 008 OPT w/ring gen, (clam shell removed) card in a Magix V4 without doing any damage? It seems to line up, fits well and seats tight in the carrier back plane, but I haven't power it up yet..
Thank you all for great advice over the years...
I have a Magix/Hybred mode with a Verizon "flexpath" T1 ISDN but no PRI service. When someone calls out from that site it's says unknown or Verizon ISDN 801. If the called person has "unknown calls" blocked it fails. Is PRI the only fix here?
Thanks in advance,
Mike NH
I am adding a C-LAN card to carrier "C" slot #1 of an older SSC G3si carrier. Doesn't that slot #1 plug on the back plane need to be upgraded with a kit specially for that?
Thnks in advance,
Mike
NH
Merlin Magix V4 key mode, "real" POTS lines, no TK-ID delay option. 4424D console set for ring immediate, others 44xxs set as delay. Customer says at times incoming calls "no Ring" just flash. I made numerous test calls, no failures.
I was thinking power unit but it tests good at each test...
I have a Hybred Magix and the error page had a few E911 overflows. I looked at Partition #1 and all the extensions were there, "Allow 11" is enabled but no lines are assigned. This system has been in for some time, are the errors because no lines were available to make the 911 call?
Thanks in...
Are there any options on the Magix 2.2 circuit pack that would block access to the "admin" port on the front of the card? I've tried SPM using a com port direct and tried IP from a Socket Magix unit and it fails every time.. Keeps saying a connection failure but I can get into others with the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.