Search results for query: *

I have a Proliant ML370 G4 with 6 x 72.8 GB SCSI 15K drives in a hot swap RAID 5, drive 0 is showing a red light and the ACU tells me that the drive has failed I have some 72.8 GB 15K drives that were pulled from another server, can I use one of these? should I format before I install or...

while all our domain users use SMTP mail, a number of external stand alone mail users use pop to connect to our Exchange 2K3 box, Outlook is set to both send and receive to an address that I setup; pop.<ourdomain> with a DNS pointing at one of our public IP's and a port forwarding rule at the...

I manage a LAN with <100 users and recently started upgrading the XP Pro machines to service pack 3, the SP3 machines are not allowing deployment of HP Printers, we have 4200n,4250n,4600n,4650n and 4700n models and the clients would normally connect to their printers at logon, but SP3 machine do...

We have 2 mail systems both Exchange 2003 on S2003R2, one is a full SMTP server with about 100 users, on <ourdomain.com> the other is a POP server with about 500 users on <subdomain.ourdomain.com> and is accessed by off-site employees and students..we are an Education Service I am moving some...

I have built a new Exchange 2003 server and installed it beside the old exchange 2003 server, I hope to do a gradual migration of mailboxes to the new box before retiring the old one The problem is that we use a smarthost, the MX points to our third-party filtering service and we use a smart...

Hi, I have build a new Exchange server for our domain, currently we have one Exchange Server 2003 Standard edition on a small network with about 100 users..the plan was to build a second Exchange box to split up the single Storage group I installed Exchange 2003 Enterprise Edition on the new...

Server 2003 R2 std SP1 domain controller one of 5 DC's on a small 100+ user LAN, the machine was used as a backup logon server until it was replaced by a bigger box, nobody thought to dcpromo it before replacing it It was unplugged from the network for a couple of months, it held the Global...

I am SysAdmin on a small LAN which is growing, I am seeking a Server management Solution, I have looked at Compaq Insight Manager but it looks too complicated to set up, I have.. About 100 clients on WinXP Pro SP2 mostly Dell optiplex 9 Servers, all on S2003 SQL server, Oracle DB, Sun DB...

I am building a Dell 2950 network storage box with 5 X 750GB sata drives in a RAID 5 configuration, but using Server 2003 instead of storage server, ideally I want a 50GB system partition C: and the rest of the RAID volume [2.7 TB]as one big partition, I have set up raid 5 and created a virtual...

I am upgrading from Arcserve 2000 to Brightstor 11.5 SP1, preflight fails with the error message: ource Nodes: \\DR01 Destination: DUB3 Agent Checks: Fail Issues: Failed to connect to the client agent on \\DR01 Ensure that the client agent on \\DR01 is running Destination Media Check...

I have a small (70+) lan with 3 DC's on Server 2003, an Exchange 2003 box and clients on XP Pro, Last week the primary DC failed, I was able to seize the FSMO roles and continue working with the other two, everything was fine for a few days then clients started reporting logon failures, not...

I have a new DL140 but cannot install Server 2003, Smartstart does not seem to support the DL140, the 641 RAID controller loads at bootup but cannot see the 2 SCSI Drives, how do I configure RAID without Smartstart? any suggestions would be welcome FrankF A+,Network+,MCSA

I have installed OS'es on Proliants many times using smartstart, when my company bought a DL140 I booted from the latest SmartStart CD, but I get this error message; 'Smartstart does not support deployment of this Server model' The Server came with a 641 smart array controller and 2 72GB SCSI...

I run an Exchange server 2003 for an Education body, one of our users works half of each week here and half with another education organisation where she has a different e-mail address, How can I get exchange to forward a copy of each message to her other office? The Exchange General tab in ADUC...

I am running Exchange 2003 SP1 with 2 x Domain controllers on Server 2003 SP1, when I look in the first server's ADU&C and open a users account properties, I seem to have lost all of the extra tabs relating to exchange server, it has reverted to the standard pre-exchange format with the e-mail...

Hi, I am having problems with our exchange server, its a Server 2003 SP1 + Exchange 2003 SP1, we are getting a 2019 memory paging error that is causing it to freeze, I have installed a new unit as a second Exchange 2003 server and moved all of the mailboxes over [apart from 3 system mailboxes...

I am upgrading a small school lan during summer, moving up from NT4 Server to Server 2003 standard edition with a new Domain, the clients are mostly Windows XP Pro, when I join an XP Pro machine to the new domain, it goes in OK, I can logon as a domain Admin and see the new Domain and configure...

I have setup an internet filtering solution and want to try it out with one department before rolling it out to the whole building, I need to change each user's IE Proxy, I created a new GPO and put the proxy in the Internet Explorer maintenance part of the user settings, I linked it to the...

We are running exchange server 2003 on Windows Server 2003, this is a small office LAN with less than 100 users, because of this we were persuaded to run Exchange on the same server as the main domain controller,big mistake! Main DC Server Proliant ML370 G3, Server 2003 standard edition, 2 x...

Hi, I work for an education organisation and I recently installed a new Dell Poweredge 1800 server [DC] in one of our Adult Education centres, I did the install here at base before taking it out to the site, I created a lockdown GPO for the classroom OU, but this did not work. I used the...