Search results for query: *

I have 10 1608 sets on the far end of a Cisco IPSec VPN Tunnel. The phones are not VPN, they are riding the tunnel to the Main Office. What happens is this. A call is generated from 1608 set to an external number or to another IP Phone on the network. The call lasts for 2 minutes and then...

I am upgrading an IP406v2 to 6.0 from 4.2. I am curious if the VCM will generate IP Endpoint licenses like the IP500 does at 6.0. Any info would be helpful, documentation doesn't talk about IP400's very much. "When you do things right, people won't be sure you have done anything at all.

I am running Windows Server 2008. VMPro 7.0.19/IPO 7.0.12 I have searched the forum to no end, and cannot find any advice. I have installed Voicemail Web services and One-X Portal according to documentation. I have done this many times before with no issues, however this installation is...

I know this is a long shot.....I have a customer that is interested in viewing minutes not seconds on the CCR wallboard. Obviously there is no immediate way to make this setting change, but has anyone gotten it to view minutes through back-end changes to the software? Or am I overlooking...

I have an IPO 6.0.18. One-x 6.0.21 (which I am about to upgade). This is a new installation. IP 500V2 140 Office Worker Lic 5 Power User Lic Initially I was able to set a single user up and test the One-x access and call control. Worked great. I then added an additional user to test against...

I am setting up IP500V2 6.0 with Juniper EX2200 POE switches. I want to set up two vlans, voice and data. I am familiar with other switches, has anyone set this up before? What are some quick pointers for VLAN setups and passing DHCP to Windows DHCP server? Thanks!

I am now trying to block anonymous inbound calls using the IPO. I know how to achieve this on a PRI or ISDN, however the same codes (! and ?) do not apply here. Anyone done this? "If you do things right, people won't be sure you've done anything at all."

Is anyone else having problems with SIP Diversion Headers. I have set it in the SIP line information. However neither the carrier nor I see the message in our traces. I have unchecked the box in the twinning under system. I have set the drop down box in the SIP line. Am I missing something...

Anybody set up SIP with Simple Signal? I am having problems getting the trunks to register. I have done this several times with other providers, however none as of yet have looked for registration through the primary authentication, and I don't see the IPO attempting in monitor upon reboots...

I have a 3 site SCN, with the PRI in main. When a call comes into a DID, it is routed over the IP Line to a hunt group via a System Shortcode. The receptionist on the far end (4424), sees only "External" for the CID name. How do I get the name passed across the IP Line?

I have an IPO 406v2 @ 4.0.14. I upgraded from 3.2.55 to 4.1.12. After upgrade off site forwarding stopped, all you get is 5 beeps in a row like the line is not available. I downgraded to 4.0.14 this morning thinking it was a bug in 4.1, but the problem followed. I have tried work arounds and...

How do I determine who lit the light on the station in order for us to turn it off? Thanks I understand the LWC commands and the msg-rt button and such, however I do not know how to tell who lit the stupid light on the 8410D. I am using a g3v4 or sumthin that has no clear all command for the...

I have a site with 10 5621SW IP phones, a VCM 16, a 406V2 at 4.0.14, with embedded VM. Last monday and this monday, all of the phones go to Discover. All stations are connected via a Netgear 24 Port switch except one, which is directly connected to the IPO. Upon failure we are unable to see...

I have IMS set up to integrate with a 2000 exchange server. The system is operating correctly, however there are a few users who i cannot get to receive the VM in the Email. Outlook launches like normal. I see the IMS client scan for MSGS at launch. The IMS Tab in Tools says Disconnect. I...