Search results for query: *

call forward using PRI is not working any idea ? thanks

hello someone has the list of all the patch and what is the meaning of each patch patch from 22.08 till 5.0 thanks

hello i have to Op11 connected with a cisco using PRI2 and QSIG one is 4.5 and the other is 4.0 but only when the primary DN is busy the second call not work (only in PRI calls) and this the error that the MSGI and MSGO send DCH 11 UIPE_IMSG CC_DISC_IND REF 00007928 CH 1 1 TOD 18:12:28...

hello I can connect to the Modem but just only have access to PDT and when i type SL1Input its frezze and then go back to PDT and i can type anything any idea ? the only way that i have is reboot in PDT and wait, and then have access to the PBX but made a reboot everytime is wrong thanks

Anyone knows who to configured la CALLER ID on analog trunks TN429 thanks

hello Does anyone knows how to change the IP address for Octel ? thanks

hello i have callpilot 4 and two op11c 4.5 and 4.0 with pri`s and qsig everytinhg works fine just the MWI on the remote site(4.0) do not turns the lamp on have on RCAP COLP NDI CCBI CCNI PRI DV3i CTI QMWI in both sites i read someting about a link between both PBX on ld 17 thanks

hello i need to setup a remote location on Callpilot 4 how do i setup the prime location and the satellite location i have pri between both op11.c (4.5) this is my DCH and the remote site ADAN DCH 11 CTYP MSDL CARD 06 PORT 1 DES Mty USR PRI DCHL 6 OTBF 32 PARM RS422 DTE...

Does anyone know how configure the relation between the Prime Location and Satellite location server ?

Hello Recently change an 3903 to 3904 and start to receive this message BUG4231 any idea how to stop this ? Thanks

Hello Does anyone know the root password for Definity Audix 3.2 ? i´m reinstalling the software on this voicemail but i receive the following message Type Ctrl-d to start AUDIX, (or give the root password for system maintenance) when i hit Ctrl-d ask me again for the root password any clue ? thanks

hello How to config the caller ID in Intuity Lx 1.1 thanks

hello someone has a guide to connect an 8710 and 8500 to a Intuity LX the servers are 3.0 and the LX is 1.1 already have isdn-pri to connect both servers thanks

hello to all I have this issue i cant turn on tha LAMP between two CM3.0 i have Intuity LX on a 8710 and 8500 connected via tie trunk, clear channels across newbridge everytink is working fine just the lamp is the problem this is the comm pro chan 1 y audix s 1 5002 intuity 0 2 1 1...

hello i can´t enable the usb modem in to the CM 2.2 server 8500 i install first the patch 02.0.111.4-10218 and is not working then i install the patch 02.0.111.4-8665 with both patch i receive the same error /usr/bin/sudo: no password entry for samp! error: RunSampModCtl...

Hello I have a definity prologix V12 and i know that i have to config something in the system maintenance page about the AT commnads for an external modem any idea ? thanks

Alguien me puede decir como configurar la consola de operadora 302 en esta plataforma??

hello there is a way to know witch is the IP address of the ip406

hello does anyone know why the MutiTech not answare ? or what i have to do ? thanks any advice

Hello does any one has a guide to configure an Small Office and Definity prologix with IP Trunk ? please contac me at lrodriguez71@hotmail.com