Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Dual Default route
I need help on getting the following application to work. I have a Cisco 1841 with two Fastethernet. One of the FastEthernet 0/0 is connected to my internal network, Fastethernet0/1 is connect to a satellite modem to the internet. I need to have two default routes. the default routes are as... -
BGP and static route
I have a Cisco router running BGP for the main (primary) link. If my main link goes down there is a back up circuit. I have created a static route with a metric of 250. When the main link goes down the traffic goes via my backup with no problem. The problem is when the main link(primary) comes... -
Cisco 1760 with t1 drop and Insert card
I have a Cisco 1760 on a point-to-point circuit. I would like to take four channels out of the T1 and connect it to the my PBX. I purchase the VWIC t1 drop and insert card and install the card on both 1760. The data came up but I cannot pass any voice on the drop channels. I have tried to... -
Cisco 2650 Output Drops
I having problem with at 2650 connected to a T1 Frame relay circuit with 18 remotes. The serial interfaces has no CRC errors and the phone company cannot find a problem, But the sho interface shows a constant increase of output drops. What can be causing this problem. Any help will be appreciated. -
Stun
Does anyone have sample configuration on using SDLC STUN between AS400 and 5394 controllers. I am connecting one port from the AS400 V.35 56K to a Cisco 2610XM, there are three remotes on frame relay with Cisco 1720 and 5394 controller connected via RS232 38400. Any help will be great. Thanks pepe
