Search results for query: *

I am at my wits end with this one. I added a slideshow picture gallery to my web page. The picture gallery seems to set it's own minimum size. I can make the picture gallery larger but can't get it any smaller. I have tried everything from tyring to drag the edge of the table to resizing the...

We have only PIX 515 and 525 firewalls in the core of our network. Because of the 3Mbps limitation of IPSEC throughput on the PIX 501 we are thinking of implementing Firebox firewalls/VPN devices at our small remote sites (1-2 users) instead. Does anyone have any experience with getting these...

I have a L2L tunnel built between 2 PIX firewalls. Occasionally the tunnel will no longer assocaiate if site B tries to contact site A, only if site A tries to contact site B. Moral of the story, occasionally site A is the only side of the tunnel that can bring it up. I've tried different...

I have a 3725 that I need to configure to talk to a PRI and my callmanager. I have the callmanager up and now it's time to configure the router so it's ready when the phone company turns up the circuit. I am not sure how to answer the following questions from my phone company or where to go to...

How do you disconnect another admin session on a PIX? (ie. i am telnet'd in and want to disconnect another telnet session). Thanks in advance.

I have 2 3700 Series switches, each with 4 1Gbps SFP ports. I want to know if there is a way to bond these ports together to make a single 4Gbps uplink between the switches. If this is possible, how would I accomplish this? Thanks in advance.

I just received a shipment of 7940s, 7960s, and 7970s but the Callmanager and Unity servers have not yet come in. I would like to replace the current analog phones on the desks here with the Cisco phones and use the existing PBX via the analog port on the back of each phone. I have searched...

What does "no-xauth no-config-mode" actually do when added to the end of an ISAKMP line?

I have 2 PIX 515s running in failover with about 100 VPNs configured. The PIX will drop all VPNS including VPN clients and i can't get them back up by clearing SAs or xlate or anything. The only thing that will fix the issue is to force a failover to the other pix or reboot both pixes. Any...

From those of you who have experience running CDP, is it worth running? Does it give you enough benefit for the extra traffic it puts out on the network? Thanks in advance for your input.

I have a wireless laptop and I use static IP addresses at both work and home. I would like to autoconfigure a static IP for each wireless network depending on which one the laptop can find and connect to. I know WinXP (which is what i am running) offers an alternate config tab in the TCP/IP...

What companies out there have good content switches? To be more specific, I am looking for a device that allows incoming connections to point at 1 IP address, but that data actually gets load balanced across multiple servers based on the server load at the time and also provides failover to the...

I receive this on my router serial interface and am curious what it means exactly: Serial1:0 is reset, line protocol is down I know what the line protocol is down means, but what does "reset" mean? Thanks!

What does this actually do if added to the end of an isakmp key line on a PIX?

What is teh real different/advantage/disadvantage of NATing inside hosts to a pool of public IPs vs. NATing inside hosts to a single public IP? Thanks in advance!

I am looking for opinions on what the best network monitoring software is out there. It needs to be able to run on a Win2K machine. Any ideas would be great. Thanks!

I have 2 T1 point-to-point connections between my central office and a remote site. I have a 1761 at the central office and a 1721 at the remote site. I want to take these 2 T1 1.5 Mbps circuits (from the same ISP) and bond them into 1 virtual circuit. I have a dual-WIC in each router to...