Search results for query: *

I have a CICS /not sure about software version/It is 1998 or so vintage. What cards and what level of software would be required to bring it up to 8 lines/24 stations? Can it be done?It has a 1 port Flashtalk mail system.

going to power down and move both a block away/Is there any preferred power down/power up sequence so as not to lose any programming? ie sytem then mail or visa versa

can't remember for the life of me/the 50 pin connectors male or female/can't find in manual

have an AMD 1.53 MZ/// Sytem Properties show 192 mb ram, but I have a 256 mb memory board plugged in.Is something installed wrong? Should it not show 256 mb in System Prperties?

son's comp got so full of virus and spyware items it wouldn't run/had to reformat drive and reload the operating sytem. everthing seems fine internet acess really good,anything from the quick launch is quick, but any applications from the desk top or trying to open a directory from windows...

What would be considered as the standard in terms of inside wiring from the Telco demarc to the adsl modem. I have a problem with the network connection going up and down. The existing wire is 400 ft of non twisted. It would probably be good place to start by replacing this cabling. Your...

does anyone know if there are optimax 2 field connectors for singlemode, if so can you use the optimax2 installation kit for them

WHAT,S THE MAX DISTANCE FOR A OP STN USING AN ATA

ccr answers call, goes to greetings(open for Business),you dial 1 for lets say 22. The line button rings at that dn22. Is there any way you can have the intercom of that dn ring instead of the line? have a dn on an ATA. programed into a grp 4 under sys programming. admin program I put dial 4 as...

I have a reuirb cics with Compact ics 4.0 documentation a software card that says cics 4X16 cics dr 6.0 s/w the system under maint says 930CGE02 NAT. I am trying to get an auto attendant working with jusr 2 grpps ,4 lines no voice mail Just to 2 other phones and an answering machine I have...

just installed a d-link di-604 and set up a home network 3 to as much as 5 times a day I lose the internet connection through the router /the local network stays working/if i bypass the routerI get a internet connection/ power the router up and down a few times and i get the connection back.

internet explorer/tools/options/programs internet programmes (it says"you can specify which program windows automatically uses for each internet service. the box for email has nothing in there/it shold be outlook express. if you want email a link or page etc using the envelope on task bar...

1km of under ground 62.5 Fiber cable required tight buffered core locked for moisture and described as for underground vs loose tube gel filled for under ground tight buffered easier because no fan out kits,less labour. will it stand up as well as gel filled over the years?

1km between structures fiber for tel system and lan/110mps mm 62.5/50 125 or sm?

If you put a store bought every day cordless on an ata, how can you access features?

put a 2port fiber expansion card in the mics and added a tm and one trk card. the companion phones won't work (now on port 126 and were working). I can't find the exact documentation, but don't you have to also add a set module using the other fibre expansion port and move the base station to...

have mics sytem that has Micro patch multimode interconnect mod 9800d and radio patch for pagers, that was interfaced across the 1st trunk ahead of the sytem. The interfaced equipment is turned on after hours and when a call comes in after 2 rings,its answered and the person calling gets a...

mics ver30HgM02/with vmI can't get 2 doophones to work.I have programmed 2 ports as per the instructions, but when I go to config the doorphones using F9*4,I get "unavailable feature".Disconnect the doorphones and reconnect them, then if I try to get into programming the display on my...