Search results for query: *

HI Guys we are moving off of our NEC r11 2400. Short story - telco goofed the port and I have 200 numbers I have to call forward morning of cut. I know historically that the MAT software will not allow a way to paste numbers into the CFD window. Is there a hack or way around that? Looking to...

trying to locate a command that will list stations or lens in make busy status.

Hi everyone, new to Cisco CUCM. we are in process of design for users. I have some q's I am an old NEC / Avaya tech. Looking for CUCM feature that is equivalent to call fwd Im here or Follow me / hoteling for internal extensions. I looked at extension mobility and that is great BUT we are...

Hi all, Still running my NEC legacy system. One of my sites is having framing slips on its PRI (24PRTB-a). Telco swears it is a PBX issue and not their problem. It has been running great with no issues until two weeks back. I have checked jumper for clock and no changes have been made in system...

Hi GUys, A real oldie here. 2400IMX R-11. Is there a command to list up all stations busied out with MBST? I have 3 2400's I need to look at.

Been awhile, I have a 2000IPS connected CCIS to a 2400. The voice mail pilot on the 2400 is 2400. On the IPS I am trying to set a speed dial for 2,400 but for the life of me cant remember how to enter the comma. Any ideas?

I have an OpenText Gateway 2100. I had instructions on how to check if my PRI T1 was slipping/errors but have misplaced. Can anyone point me in the right direction?

HI ASll, I am trying to set call block on my 2400IMX r11. I can get the block to work with ACID BUT it only transfers to voice mail and I would like the blocked call to go to busy signal. Can any7one shine some light on this?

Unable to run MEM_HDD while on CPU 0. I am thinking the flash card is shot. Any ideas? Can I swap the flash cards and see if trouble follows? Is the flash card replaceable and wold I have to format?

HI Guys, Been a long time as my network eng duties have pulled me away from my PBX work. Trying to find a way to get a daily route peg count for our 3 Fusion 2400's and 3 CCIS 2000 systems. I am hoping someone knows how to set this up for daily peg counts so we can determine call volume inbound...

Any Rightfax pro's here? I have Rightfax with Opentext 2100 gateway. We are experiencing very slow recieve and transmit. Also unable to fax more than 5-6 pages. Any ideas???

Been awhile since I have been here. Does anyone know how to set Call ID blocking on 2000IPS? I have searched through Feat & Specs and am not having any luck. I found call redirect but no blocking.

Is the Cordless DTH-4R-2 compatible with 2400IMX? Been a while.....

We have a legacy IMX fusion netork along with 3 200IPS retrofit PBX's. Is anyone using the older MAT and Matworx softrware on newer windows OS?

We have a user that we want to setup remotely. Does R14 support NAT or do we have to use VPN?

We have an Aimworx 5.0 machine that has Windows 2000 on it. we want to move this to a Windows server 2003 box. Looking at documentation it says to run SQL 2000. Will Aimworx work with SQL 2003 or 2005? Is this migration possible or even worth the time? We are moving to new VoIP system in the...

I have 3 IMX R11 2400's. I am trying to get the alarm messages sent from the remote offices to the main site for T1 alarms. Anyone ever set this up? Manuals say it can be done but I am unable to find programming steps.

Anyone have some expertise with Traffic reports for IMX? I can get the reports but have to run them manually every 2 hours. I would like to somehow automate them then deal with the data later.

We have a mix of Cisco 1131 and 3502 access points. We also have 4400 and 550 Controllers. It has been recommended that we disable 802.11a and 802.11b to minimize beaconing. Not sure how to do this. Is this something we can turn off with the controllers or do we have to do this on each AP?

I tried like heck to get my Desktop folks to get me a new laptop with a serial connection built in but it went in one ear and out the other. Do any of you use a USB to serial adapter for NEC IPS Matworx and 2400 MAT. If so what is working well for you?