Search results for query: *

Rel 10.1 We are using Sip Avaya workplce on Iphones. On the Iphones we have a brige appearance of there Desk Phone, When the desk phone Rings (appearance on the Iphone) if the Desk phone is answered the Iphone continues to Ring, Any one have any suggestions? Thanks

We have a R10 to R7 H.323 tie line. On the R10 side all members are showing inservie/active. This has been working for 6 months and just got into this state. Have tried to busy - release the sig group and trunk group at both ends. also tried a reset system 1. Any thoughts appreciated

I had to move a pri to a different slot and change the sync sourse in a G450, When looking at sync timing, both the primary and secondary sourse where happy. But the gateway still showed sync fault. I ended up re-booting the gateway to clear. Is there a command that i could of used instead...

Anyone know how i can view sip user registrations via SM cli?

Bankrupt again, oh Joy So what happens when they go out of business? guess i need to start looking at cisco

Anyone know were the SIP station re-registration timer is set in SMGR? Have an application that does not seem to be ble to keep up with the amount of registrations it sees and want to slow it down

Putting in Sentry 911 soulution, CM 7.1 We have a mixture of IPhones with ixworkplace, Androids wtih ix workplace, 8440 Spec phones Have modified the 46xx setting to SET ENABLE_PUBLISH_MAC_ADDRESS 1. Im being told that the Iphones do not support this funtion, but Androids and Spec phones do...

We are adding a sentry 911 solution. Our wireless phones- Iphones with Ix workplace is not populating SM with the correct MAC address, Thus unable to pass to the sentry server. We have turned off Mac randomization on the Iphone, Changed aads configuration settings file to enable publish mac...

Iv seen several post on this and still trying to get my head around it. PSAP calling back for 911 calls: ElIN defined per ip-station maping xxx-xxx-3400 911 routing set to alert Sys paramter feature Emergency Extension forwarding min 10 So i call 911 from 3900 and hang up, the PSAP recieves...

We are using AVPs to host CM, SMGR and SM Moveing our core data switches to new ones and are afriad with will run into ARP / MAC issues. Is there a command that will clear the ARP tables in the AVP with out re-booting? Thanks for any input

I need to Change our NTP addressing. CM 7.1.3 on AVP I know changing in previou versions it would be a re-boot, is this still the case?

Is there a simialar comnand for trunk ports like you can on a station to see what trunks are programed on a certian board List sta port 05e07 would list all the stations on that card. I need the simular for DS1 card Any input is appreciated

Anyone know of a way to pull a report or find out the last time a SIP user has Registered? Thanks for any unput

Have an ixworkplace staion set up with ec500 i can not make work, yet if i unregister the number and re-register the same number on an 8440 spec phone it will work Any thoughts to point me in the right direction apprecited.

wanting to use 9611 sip station via remote worker application. Im unable to assign Auto-in or aux buttons. Says invalid entry What am i missing?

We have AAM messging, recently users are complaining, If they are in there mailbox and just hang up, then try to go back into it, it will say your mail box is use. This lasts for 60 seconds. I dont see an issue this but they are insistant this is a new issiue and that it just started. Is this...

I have k175 vantage sets set up using "Vantage Basic" as the dialer. done thru the 46xxsetting file. Im trying to default them and set them up to not use the setting file. wanting to down load ix workplace and a vpn client to set up manualy. Iv been able to factory reset and put it on our...

How can i make code calling work in a G450, everything i read says you must have an AUX trunk board? Thanks for any responses.

I have all our gateways set to use Clock sync over IP, once in awhile the gateway loses its timing. the command set sync source primary will not work when timing is configured as a Voip source. It there any way to recover the timing other then re-booting the gateway? Thanks for any and all...

Is there a way to status/list who is logged into one-x communicator. Disp cap shows us how many are logged in but want to know who is logged in. Thanks for any input