Search results for query: *

Hi Can anyone help me on this please, I have a severe lack of understanding!!! To enable Email I have set up a static command in our PIX firewall, that specifies a global address for the local host. My problem is that as we have an ISA server, all internal host are reported as having the IP...

Hi All I was trying to set up a VPN (which worked) but in the process knocked out my email via a PIX 506e. I have lines for email as follows: access-list acl permit tcp any host 1.2.3.4 eq smtp access group acl in interface outside static (inside,outside) 1.2.3.4 10.0.0.1 netmask...

Hi I have a PIX 506e and I am trying to enable a VPN via IA2004. It works if my access lists are: access-list vpn01 permit tcp any host x.x.x.x eq 1723 access-list vpn01 permit tcp any host x.x.x.x eq 47 access-list vpn01 permit tcp any host x.x.x.x Now if I remove the last line it fails...

Hi I am trying to get an iMac G5 with Tiger OS to connect to our Exchange server 2004 and our DC and file server which is Win 2003 (they are all patched up.) I can send email, but cannot recieve. I have tried to set up the AD bit too. I cannot connect to the server either, whether smb or via IP...

Hi I always used to access my PIX 506e via Hyperterminal and the serial port with a RJ45 adaptor. (I think this is the standard way.) Now - after one week or so of not looking at it - I find I do not get any response from Hyerterminal. I just get a cursor and no PIX> prompt. I have checked the...

Hi All We currently use POP3 mail pickup and SMTP mail delivery on Exchange 2000 on W2000 SBS. We are going to migrate to SMTP mail. To this end I want to make sure I can access my mail server through the firewall and router before I go live. I understand I should be albe to telnet through on...

Hi I have had a look around, but could not find anything for this scenario. We use W2000 SBS, which comes with ISA and Exchange bundled onto the one server. We only use POP3 at the moment but want to move to smtp. We also have a PIX 506e. As a router we have a Dlink 50504T, which is set to...

Hi We have a PIX 506e behind a D Link router, with a single public IP. Currently the router NAT's and firewalls, so the subnet between the PIX and the router is a private 192.168.x.x address. As I need to set up a VPN I have been told to turn off the NAT and firewall on the D link router...

Hi All Can anyone tell me how to set up the equivalent of an Out of Office Assistant email for Entourgae and OSx.2 please? I jsut cannot seem to find it Thanks Harry

Hi One of my uders has Office 2003 SB Edition. This morning all her spreadsheets printed out the first page in a condensed mode. I cannot understand why, having been through all the settings. it does the same to two ddifferent printers. Any ideas. could it be connected to a JetDirect update i...

Hi We have a PIX 501 and it appears to have just stopped working. I get error: No route to 158.43.240.4 from 192.168.1.3 (158.43.240.4 is the ISP's DNS, and 192.168.1.3 is an internal client address.) I have played with it ans even reloaded the config, but no go. Is it possible it is broken? I...

Hi On an earlier post some-one recommended link http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/p... What I do not fathom is I have a home user who dials up to get onto the interent, how will it know what their IP address will be to allow it through PIX? Most of the commands for allowing...

Hi We have a W2K SBS installation behind a PIX 506E. We would like to use the MS VPN solution, but need to allow it to pass through the PIX unmolested. Could anyone tell me how to do this, or point me at a web page that might tell me. Thanks Harry

Hi We have a G4 laptop with Panther (OS X 10.3) on it and Entourage. This morning the user could not access it with the following error: "Entourage cannot access your data. To attempt to fix the problem rebuild your database." After trying a typical and advanced rebuild it still fails...

Hi We have a G3 with classic, a G4 with Jaguar (OS v10.2), and two laptops with Panther (OS v10.3) and a network printer. I have just rewired them through their own switch to make a little Mac peer to peer network. However I am having connectivity issues. I have set the IP addresses manually...

Hi I have a user with a laptop and OSX 10.3 (panther is it?). When at work we use DSL and when at home he uses his own dial up. He uses the default mail client that came with the OS. Hence he needs to use different outgoing nmail severs depending if he is in the office or at home. When I set up...

Hi What is the longest length of firewire cable we can use. Can it be pushed through a switch at all? Thanks Harry

Hi wondering whether to save money and buy an Xserve and running software RAID on it, or whether to get an XRaid box too. Anyone any opinion on hardware/software RAID? Thanks Harry

Hi I have been getting ESE errors in event viewer ever since I migrated to W2K SBS. (Event ID 474, Source: ESE, Category database Page Cache error) I believe my private database is corrupt. Can i just create a new database and do a brick level restor to place the mailboxes back in it? (We have...

Hi We are looking to buy some MAC kit for our design department. We require a RAID configuration, but not of huge size by todays standards. Is it possible to put a RAID controller into a Xserve; or do i need to buy a Xserve RAID dedicated machine specifically. (The reason i ask is that it...