Search results for query: *

We have a database that runs as a standard .mdb file. No mdw's anywhere. When we open the database, it prompts for a password, which we have and enter. However, F11 doesn't work, nor does any other attempt to view the tables. We have been running the database for quite sometime and would...

Without going out to each remote site, how do I check to see if the tunnels are up while logged into the headquarters 506? Below are the configs from the headquarters 506 and one remote site - BCL 4, a 501. If I needed to redo the tunnels what commands would I use? Our Cisco Engineer is on a...

We manage a 10 node network with a 501 (DSL 768 both ways)at each remote site and a 506 (Dedicated T-1) at the headquarters. The 506 is plugged into a Catalyst 3750 with enhanced software on it (I think EIM?). Since we have our mail server sending traffice across the 506 and our Avaya VoIP...

We have a 3750G we just dropped in. Hanging off it are 2 2970's. I want to enable QoS, and set the uplinks voice packets to have the highest priority on the LAN/WAN. We have 1 2970 across a Tsunami 45 wireless connection. Everything has been working fine; however, I am concerned that a large...

Existing system is an 406, how do I connect the 403 using the ethernet ports?

Current Scenario: Headquarters with 50 2420 phones and an IPO 406 8 Construction sites with 2 4640 phones each Network is a Cisco PIX 506 at the headquarters and Cisco PIX 501's at 6 job sites. I have also deployed a Tsunami 100 (100mb full-duplex wireless bridge) that serves as a backhaul to...

I ran the upgrade on my 2.0 system tonight and all 4 units failed. Now the main IP406 module is continually rebooting and flashing red at the end of each reboot. How do I proceed? This is a production system. 702-400-4366 if anyone can help.

I had an 8 Port analog module fail last week. It is connected to an IP406 with about 45 digital phones and 15 IP phones. I replaced the module with a new one and today the new one stopped working and the light on the front went orange. After a reboot it came back up, but I am getting worried...

Can I upgrade the phone manager pro clients, then do the units later? Or is the phone manager the same as 2.0? How about the IMS client?

Setting up a system with 25 digital and 12 IP phones. We will be using the Voicemail Pro and IMS. Will the IP400 Voicemail Pro RFA work by itself, or will I have to add an RFA 2, RFA 4, etc?

Existing ISP shut down, we moved our PIX's over to Sprint DSL lines. When we bring them up the tunnels are there. We can ping across them. but we cannot RDP across them, browse across them, or resolve DNS across them. Fixup protocol is there for DNS and HTTP. Version is 6.3. Any ideas? We...

How do we log all outbound calls? We do not want to record calls/conversations, but we need to know what extension is dialing a particular outside number. We have full PRI. I know we can look at the log's at each phone we use: 2420 and 4620's, but we need to see a text file, etc. Any help is...

Just set up BES on a standalone machine in an Exchange 2000 Domain. I downloaded, installed, and registered the cdo.dll file on the BES server. When I add an appointment in my Handheld it shows up on my desktop within seconds. However, if I add an appointment at my desktop the handheld never...

Starting last Saturday night all of my e-mail is being kicked back to my exchange server from network@blackberry.net I use the Desktop redirector with Outlook 2000 SP3. It has worked fine for six months. I can send from my blackberry to other users fine. I am also not receiving any messages...

Can someone tell me the least painful way to switch from Intuity Mode to IP Office mode in our VM Pro system? I would like to keep the .wav files by just moving them if possible.

Just noticed that we can park a caller from the Phone Manager and see the call parked, but it does not work from the phone itself. In addition, you cannot even see the parked call on the phone.

After our Windows 2003 server upgrade and move of the VM Pro server to another machne, our three "Park" buttons stopped working on all of our phones. When you try "Parking" a caller they are disconnected. Any ideas.

I upgrade the VM Server to Windows 2003 and now the following services will not start: IMS (Voice) IMS (Gateway) The other services start. Event viewer lists Event 3 and references the NAVoiceManager.cpp in the following path, which has never existed on our server...

Does VM Pro 2.x work on a 2003 Server? Our Exchange 2000 Server is on a seperate 2000 box and will stay that way for some time, but we would like to upgrade the 2000 server running the Avaya software to Windows 2003.

I have a PIX 501 connecting our private LAN to an XO T-1. I want to implement the VPN 3005 I just bought, but am unsure as to the best topology. Do I put it in front of behind of or parallel to our PIX? If it goes in front of it, do I have to recreate all of my VPN tunnels between the main...