Search results for query: *

Hi, I would like to create a Branch Office Tunnel between a NVR1100 and a BSR222. The NVR1100 has been discontinued but I thought it might still be available to create that BOT. On the side of the NVR1100 I have a Static public ip. The NVR1100 I would like to use as a responder. On the side of...

Hi, I would like to create a Branch Office Tunnel between a NVR1100 and a BSR222. The NVR1100 has been discontinued but I thought it might still be available to create that BOT. On the side of the NVR1100 I have a Static public ip. The NVR1100 I would like to use as a responder. On the side of...

Hi, I have a BSR222 at HQ configured to terminate ABOT tunnels coming from a remote location. This works fine. When I enable and configure the BSR222 at HQ to terminate user tunnels, the ABOT is not working anymore. Does anyone know if the BSR222 can support both ABOT's and user tunnels...

Hi, I am in the process of implementing a Nortel BSR router and would like to configure the backup feature included with it. This will be usefull if the primary WAN link goes down. I see that I need to connect the BSR222 to an external modem which I have already done, but I am stuck at the...

Hi, I have a Nortel BES 1010-48T switch here that will not boot. It does power up and all the fans are running. None of the lights in the front for the ethernet port are blinking. I tried to ping the switch on it's given IP adress but no response. I connected to the switch via serial and this is...

Hi, I am in the process of configuring some new Nortel BES1010 switches. I use both BEM and IE to manage the switch. I want to uplink the switches with fiber to another switch at another location but I am unsucessful in doing that. I use SX GBICs on the switches. I thought that maybe those ports...

Hi, Is the ERS2500 series switch a real router? (L3 switch?). I want to route traffic between 5 subnets and looking for the smallest Nortel router that would be able to do the job. Thanks in advance.

Hi, We have set up a DMZ for one of our customers. I used a NVR600 and an ISA sever 2004 to set up this solution. A schematic overview should look like this: Internet -> NVR600 -> DMZ -> LAN. On the external side of the DMZ we have an NVR600 with 3 interfaces. 2 of those intefaces are public...

Hi, I have set up an NVR1100 to do port forwarding to internal servers. (Servers on my LAN) The public interface has an public IP address that listens on https traffic and forwards it to an internal web server. When the packets arrive at the internal webserver they are processed. In the logfile...

Hi, I have set up an NVR1100 to do port forwarding to internal servers. (Servers on my LAN) The public interface has an public IP address that listens on https traffic and forwards it to an internal web server. When the packets arrive at the internal webserver they are processed. In the logfile...

Is there something special that you need to program to have a second PRI card working on a Option 11C. The Second PRI have a DCH, but does not have a CC. The CC is on the First PRI Card. The First PRI Card is running as a Slave to a Master Clock at another side (PBX A). How can i have the...

Hi Guys, i'm getting a ELAN029 on a Option 11C with an ITG Card. The meaning is: The server has registered with the CS but cannot be found in the node1.cfg file According to documents this happens when a unknown ITG card registers with the CS. The Call server maintains a list of all known...

How can you put an O11C in Daymode, without having a attendant console present? Cheers! Rev