Search results for query: *

Hi, Is it possible to use a cisco router to give out setting files etc to ip phones from Http server on cisco router? option 242 ascii "MCIPADD=10.x.x.1,10.x.x.2,10.x.x.3,MCPORT=1719,TFTPSRVR=10.x.x.254" lease infinite I can upload 9600 files to router but I missing something? Regards, R

Hi, When an Attendant is busy can calls overflow to another Attendant in different Tenant partition ? Thanks in advance, r

Hi All, Has anyone added a handset to an Attendants IP SoftConsole PC. Does it wotk OK? Thanks in Advance, Rod

Hi All, I have a device that connects to our DS1 board. But it can only see 4 digits sent from the telco i.e. 5555 but I need to see 1234-5555. How can I programme this on the Avaya CM3.1 Thanks in advance, Rodney

How do I determine whether S8300 is A or B, there is no sticker on the server? Thanks, Rod

Hi all, Has anyone had any problems trying to connect to the services port on the SAMP module? I have installed the AES software and restarted server. I can still connect to the temporary services port Eth1 192.11.13.6 but this interface is needed to communicate with CLAN. I am following the...

Hi all, What does the following represent under 'display system-parameters customer-options' Product ID Rel. Limit Used IP_API_A : 100 0 IP_API_B : 0 0 IP_API_C : 0 0 Thanks in advance. R

Hi Guys, Has anyone dialled into an ASG and browsed an S8720 via explorer? I can only ssh or telnet to it. Not sure if this is supported. Regards, R

Hi All, I am trying to add an LX onto the G3R Rel 9. I have added a new clan and the 'switch-link' is UP UP But I am having problems with machine id. Under the ' communication-int proc-channels' should I specify the new LX as session remote 2 and Machine ID 2? Thanks in advance, R

Hi All, Is an intuity LX compatible with a G3R v9. I cannot find a document that lists compatiblity between lx and G3r etc Thanks in advance, R

Hi All, Can an IP Phone 46xx with VPN remote software (vpn client) connect directly to any vpn server/firewall or is an Avaya box/ASG needed?? Thanks, rod

Hi Guys, How long can an ESS Server control port networks after network failure to Main servers? I might have to leave a remote site in ESS mode for a month as a result of networking issues. Thanks in advance, Rod

Hi all, Does anyone have a procedure for upgrading 'signed' circuit packs?? Thanks in advance, Rod

Hi Guys, I need to find a Cisco router that supports 2 fastEthernet ports. The 1700s support 1 100m ethernet port but can only support another ethernet port running at 10m. The 2611 supports 2 100m ethernet ports but is going to be end-of-life and sale. Whats next? Thanks in advance, Rodney

Hi Guys, I am trying to implement QOS of IP Phones across the WAN. I am using 2950 switches and 1700 routers. I have programmed the routers with class maps. I would like to configure the fast ethernet ports on the switches for QOS. I ran a sniffer on the IP Phone and found that sigaling was...

Hi Guys, I have prebuilt 3 ds1 boards TN2464c. Added them in circuit-packs and programmed trunks, ds1 and signalling groups. If I 'list config all', it states that there are 'no board' in the slots that I have programmed and inserted the cards? The PRI lines are not delivered yet, would I...

Hi Guys, How can I verify that my pc's bios can detect hard disk? I have gone into Bios but cannot find this out? Thanks in advance, Rod

Hi Guys, I think I know the answer to this one but I will ask anyway..Is there anyway of making multiple changes to stations? i.e the same change on 300 stations? Thanks in advance, rod

Hi Guys, I have setup a new VDN. When calls come in and the customer selects the new option the call gets routed to the new vector. The problem is that the agents cannot tranfer the call from the vdn??? The user can log into 2 skills but cannot transfer from the new vdn? Any ideas would be...

Hi Guys, I have setup a new VDN. When calls come in and the customer selects the new option the call gets routed to the new vector. The problem is that the agents cannot tranfer the call from the vdn??? The user can log into 2 skills but cannot transfer from the new vdn? Any ideas would be...