Search results for query: *

Hi can I please get some help for configuring dhcp-helper address on a extreme switch thank you . Do I only need to add this command ? config bootprelay add <ipaddress>

Hi i have two active routes in OSPF area 0 with the same equal cost. how can i make it select the 2nd router over the 1st ? do i have to adjust the cost on both sides ? show ip route 10.10.23.1 Routing entry for 10.10.23.0/24 Known via "ospf 1", distance 110, metric 2, type intra area Last...

Hi any ideas on what could be causing the slow speed issue ? I check the output of the show interfaces port-channel 1 command. and i don't see anything wrong . MTU 1500 bytes, BW 2000000 Kbit, DLY 10 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not...

I added a host to an existing ACL config below and when i do a show run i don't see the changes along with show access-list command. any ideas access-list 5 permit 10.10.30.18

R1____________ 10 Mbps____________R2 Active link _____________45 Mbps____________ new circuit We are running ospf area 0 and plan on making the new circuit the primary link. My question i just want to make sure I would have to adjust the ospf interface cost on both R1 and R2 . So traffic...

Do i just need to use tftp to transfer the file or can i use scp ?

Hi i'm new to the world of Extreme and needed help setting QoS thanks up front for any feed back . So i need QoS for DNS, mysql tag dscp 41, TCP/UDP 5001 tag dscp 42 all the rest Dscp 43

First off thanks for any help running IIS 6.0 index.shml Documents and home directory are both setup . Configuration setup following these steps. http://www.microsoft.com/technet/prodtechnol/WindowsServer2003/Library/IIS/eced0b89-e052-42ff-baa8-751dd191c3b5.mspx?mfr=true thank you.

At one of our Remote sites we have a PIX506 we are getting alarms regarding Critically low Memory Free. I'm thinking a host or hosts on the inside interface is eatting up sessions. Is there an easy way to tell besides show xlate ?

i wanted to know if anyone seen this problem before? i have a netscreen with a route base vpn to a Cisco PIX. the netscreen events log show this error. 2006-09-12 10:54:35 system info 00536 Rejected an IKE packet on untrust from 216.x.x.x:500 to...

Has anyone setup Microsoft IAS to work with PIX before or know of any links thanks.

It's seems i'm having a problem getting phase 2 to work. It's like there's no answer back from the pix for phase 2 but phase 1 completes fine. any ideas? Also this envrioments is mix with alot of netscreen-to-netscreen or PIX-TO-PIX this is the first time we are trying to mix netscreen-to-Pix...

I'm trying to setup Redirect permanent and it's not working. Here's what i have some from in httpd.conf thanks for any help. # Aliases: Add here as many aliases as you need (with no limit). The format is # Alias fakename realname # # Note that if you include a trailing / on fakename then the...

Hey everybody i needed so help with understanding Apache url redirects and how to set it up. I found two links but still i'm unsure how to set it up. Thanks for any feed back. http://httpd.apache.org/docs/1.3/mod/mod_alias.html http://httpd.apache.org/docs/2.0/misc/rewriteguide.html

I need help i'm running Suse 10.0 our website pages are .shtml i manage to get it to index the correct page but it displays the page in source view or code. Any idea what's wrong? here's the out put from httpd.conf # # /etc/apache2/httpd.conf # # This is the main Apache server configuration...

Hey everyone i was trying to configure BGP today. And we are using two cisco 2801. When i try to enter a BGP command i get this error message. Any ideas?

I wanted to know if anyone can help with configing a router with two T-1 connections to two different providers for failover. Will i need to work with both ISP and configure BGP for Failover? Thanks for any help.

We have a remote site configure to allow a remote citrix connection to HQ. The citrix application is performaing badly over the vpn. All other traffic over the VPN connection to HQ works fine. If we do a clear xlate on the remote PIX the application works fine for about 10 minutes. Then the same...

Which commands do you need to issue to test the VPN connection on a PIX?

I guess my question should be can you import .MSF files into outlook or anyother email client? I have try outlook express netscape etc. They all see the files but can't open them. And i can't export these folders either any ideas?