Search results for query: *

Hi all, I have a 9.0 definity. My old SAT went and replaced with new. I however don't remember how to setup the F1 thru F8 keys. I know they have to be remapped but I don't know the SAT codes to assign? Could some one send me a list of SAT commands for the F keys? Thanks you

Hi all, I have an IPO 500v1 8.0 43. The original feature does not have any license features. I purchased a feature card with license features. How do I go about upgrading the new feature key card? Thanks in advance.

Hi All, I have a Harris Caller ID test unit connected to an analog port. The problem is, the test unit is dialing out 7 digits. The first 3 digits is always 000 and then the extension. Is there a way to delete the first 3 digits 000 and to just dial the last 4 digits in a short code?

HI all, Does anyone know of a place that sells power supplies for the IP 500 v1?

Is it possible a TN2402&TN2182C work properly on a G650?

Does anyone have documents on slc 2000 BYB2 card setup? Thanks in advance

Does anyone have TN735 cards they want to sell or get rid of. Thanks Ryan

Hi All, I just got a 9641G IP set and I can't seam to get the weather or world clock to work on this set. Does anyone have any hints on getting this work. I've tried every setting in text script.

HI All, I have an ip500 with 8.0.42 loaded. I want to setup a new embedded voicemail. In the alarms it says, The following syatem resources are all in use. Voicemail Channels How can I set this up to work?

HI All, I have an IP 500 and it has 8.0.18. I would like to know if you need a licence to use SIP as a tie line to another IP small office. Also do you need a licence to use a PRI trunks.

HI All, I have an IP 500 with s/w 8.0.18. I plugged in a 9650 IP set and all I get is ethernet not availiable. I have typed in craft# and reset the values and the phone and still get the same thing. However the 9620 set works fine with no troubles

Hi all, I have a new/used IPO 500 with 8.0 licence. There are no modules put in. I plugged in a 1608I set in and it says no licence. Do I need a licence for phones to work?

HI all, I have an IPO 406v2 pcs6 with software at 3.2.69. I would like to upgrade it to 4.2.23. Do I have to start the upgrade off with 406v2u bin or 3.2.99?

Hi all, I have a small office IPO on 4.2.23. I would like to be able to record calls by hitting a call record button. I do not have voice mail on this. How could I set this up? Would using contact store help me with this?

Hi all, I used to have my web button point to the avaya web page. Is there anything else I can have it point to like a google search or something fun?

Hi all, I tried to upgrade a SOE 2.0 to 3.2.99 and then to 4.2.20. It did upgrade to 3.2.99 great, however when I tried to upgrade to the 4.2.20, it locked up the ethernet ports. How can I get the ethernet ports back?

HI All, I have a new SOE PCS 16. I loaded the 2.0 sftware and it went fine, then I tried to upgrade it to the 3.2.99, then every thing went wrong and I got a red light. I then went to the DTE port and did AT, AT-X, AT-X2 and AT-X3. That went good and got OK after all. But I still have a red...

Hi all, I have a definity 9.0 prologix on tn2402 processor card. When I make a call from any station and it goes out a ground start line, the call gets randomly drop always 2 times in a row and then the third time it will go through. I tested the ground start line and everything is good there...

Hi all, I upraded a SOE from 4.2.15 to 4.2.20 and since then, time has been incorrect on all sets. I have tried rebooting and making changes but the time still won't update. What else should I do?

Hi all, I upgraded an IPO SOE from 4.2.11 to 4.2.20. After the upgrade the 16xx sets now reboot every couple of minutes. What do I need to do to stop this. The phones were also firware upgraded to b10483.