Search results for query: *

I've got a Linksys SPA8000 VOIP gateway that i'm setting up to connect to my PBX. I've been strugging with Nat Policies, Access Rules, and the VOIP tab (enabling Sip Transformations, and Constant NAT). My VOIP gateway is sending packets just fine, but receiving 0 packets. Last night i took the...

I've recently setup vlans on my network, 1 vlan (vlan 0) is my HQ office with a Pro2040 and the other 2 vlans (Vlan 1) and (Vlan 2) are just in my Branch office connected by P2P fiber. Vlan 1 carries all data traffic while Vlan 2 is just for VOIP. Since i've converted my network to Vlans from...

I'm trying to setup QoS to have anything on Vlan 3 be set to Highest Priority (7). This is for a branch office that will have VOIP over a Fiber P2P link, as well as their internet data so PCs will be on Vlan 2 and Voip Phones will be on Vlan 3. I see a tab in the QoS configuration menu showing...

I've got a Site 2 Site VPN, and it keeps dropping. I setup PRTG Traffic Grapher (great program) and see that the the VPN is dropping when bandwidth is maxed out. Is there a way to prioritize the Site2Site VPN so this doesn't happen? Thanks!

I've got a Pro2040 in my HQ and a TZ170 in my Branch office, I haev 1 VOIP phone in this office that connects back to the PBX in the HQ via this VPN. The VPN goes through phases of bouncing a few times per day, which prompts me to go in and change the settings for the VPN, say from Main to...

I've got a 75 user network i support, and i'm looking to upgrade my older 3com layer2 switches to something newer. I also would like to take advantage of Vlans. Currently my Sonicwall is doing all of my routing, i'm wondering if a layer 3 switch might do better and have the sonicwall just...

I've been reading a lot of articles and whitepapers on packetshaping and WAn bandwidth management, some of which made me wonder how applicable this may be in a 70 user environment. I'd mainly like this technology to be able to prioritize my business applications, as our main system is a hosted...

I'm looking into redundancy for a VPN connection that connects my HQ office with a branch office. My current setup is a PRO2040 in the HQ and i use routing roles to send all traffic for the Branch Office's subnet to a Cisco Router, which is connected to a Point to Point (P2P) T1. I'm looking...

I must be doing something wrong. I got Kiwi Syslog running. It's on UDP 514. I then went to the log tab of my Pro 2040 and put in the IP address of the box running KIWI and set it to port 514. I'm not getting any data in the Kiwi log. The testlogs work in Kiwi so i think it's something to do...

I've successfully setup a Site 2 Site VPN (A Tz170 w/ standard OS connecting to a Pro 2040 w/ Enhanced). I can hit the LAn on the Pro2040's side and all other subnets jsut fine (including the Domain Controller), but the machine on the VPN isn't authenticating with the Domain Controller - using a...

Is there a way to get tracking and/or reporting for what websites users go to and how long they are on them? I'm not sure if the content filterins subscription would do this or if another piece of hardware would be required. Any help would be great . thanks

I'm looking to create VPN Tunnels from 3 remote offices to the main offices to allow access to network resources, our Server, and to use IP Phones. Each office will have their own T1 and i was wondering if there was a way for these offices to use their own T1 for all traffic except for traffic...

We currently have MPLS VPNs connecting our 3 branch offices to our main. We were using a TZ-170, but just upgraded to a Pro2040 as I needed redundent WANs and a DMZ port for the VOIP phone system. Has anyone tried setting up VPN tunnels and running VOIP over them? I'd like to drop the MPLS VPN...

I'm looking for some help, we have 3 offices connected with 1700 Routers via a MPLS VPN. One office has been having problems on and off for about the past year. The provider (PaeTec) does their overnight testing and comes back with "It's your equipment." Everytime they say it's my equipment it...

I check the SSC daily for new threats or if I get an email saying someone has a virus. Problem is for sometime now when i right click a client, select all tasks, select Symantec Anti-Virus, select Logs, then Threat history It pauses for about 10 seconds with an Hour Glass , even goes as far as...

What is the best practice for labeling media? I have 2 sets of media - of 5 tapes each. One tape for each day and then every week the set it switched with one in Offsite Safety Deposit box. Should I create a new media set for each set? Right now they are all apearing in the Differential set (8...

I have a job scheduled for 6:00 PM every night to run on BE 10d. The drive is an Exabyte VXA2. Every night i switch the tape before i leave and sometimes i'll come in to find the job completed successfully - other times the tape will be out of the drive and the Job will be marked with a ?Loading...

I thought i was prepared, i read the install guide, but somehow everything got screwed up. I ended up removing ver. 8 all together and starting over. No i'm at the point where i've got the server setup and installed but can't get SSC to connect. It says it can't connect to the server though it...

I'm about to upgrade from NAV CE 8 to SAV EE 10. The book seems sorta of confusing wen it comes to upgrading, as they throw around upgrade and migrate and i just want to make sure i'm following the correct steps. Am I supposed to delete the security console? Is this just an Add/Remove programs...

Hi, I had an employee leave and therefore deleted her user account in AD. I don't want to purge her account however as I want to keep it for auditing purposes. Is there a way to stop my jobs from failing due to BE's inability to find the missing directory? I went to the exchange folder of my...