Search results for query: *

I read other posts about this issue but want to introduce our specific details in hopes someone can assist with a resolution. No matter what we do, the problem remains. Thanks in advance to all who respond. --------------------------------------------------- Need help with DNS. Issue...

Hello. I've been asked to build a 5 server domain (Win 2003) without workstations. The build instructions have me creating a domain controller without DNS and installing DNS on one of the four remaining application servers (stand-alone). I joined all five servers to the domain and installed DNS...

I apologize if this is the wrong place to post this. If so, please move it to the appropriate forum. Scenario: Remote users are locked down (can't install programs, change time, etc.) by domain policy. Remote users access corporate network through an SSL appliance (Juniper SA2500...uses...

Regarding a server with a RAID 5 array, is it better to boot from a drive separate from the RAID controller or boot directly from the RAID array (C drive being a 2 gig partition on the RAID)?

I'm installing another 4.11 server, this time with a Adaptec 2400A RAID card. The problem I have is that the controller driver requires at least SP8, but my installer is the original release of 4.11. Typically I patch the OS w/ SP9 after the initial installation completes. My PRO100 NIC driver...

I first want to thank everyone for putting up with my numerous questions. You are great and I applaud you! Now that the new server is built, I plan to fly out and install it. While on-site, I will build the second (redundant server -- non-SFT III). A couple of questions: What is the best way...

As I go through out online server, I discovered additional configuration files in the sys:\etc directory. It appears the server is loading them because remote.nlm and rspx.nlm are being called there and not from the autoexec.ncf. As usual, a few questions: What is the value of inetcfg and is...

Hello All, I am still working on my NW4.11 server and am doing a few disaster tests. One of the tests consisted of busting the mirrored set (synchronized) and booting from each drive separately (simulating a failed drive in the cluster). What I found after breaking the mirrored set was both...

This is redundant to a post in my "bindery" thread. I am creating a separate thread so it will attract attention. Our main server just crashed and I need to get this one finished as soon as humanly possible. I just installed NW4.11 and patched it w/ SP9. The server has an Intel S875WP1-E Mobo...

Well, as you can see from my previous post, I have to build a new NW4.11 server. The current two-server network was built and implemented as NDS when it wasn't necessary. The only reason NW4.11 is installed is because we couldn't purchase NW3.12 at the time -- which is very stable for our...

I have a NW4.11 server that started a new behavior about six months ago where it would abruptly freeze with 99% utilization. Normal utilization is about 6% at any given time. Since the behavior began, the failure interval slowly decreased and is now anywhere from 1/2 day to 4 days. The only...

I have an Asus P5GDC Deluxe motherboard w/ a 3.4 GHz processor and a gig of Corsair TwinX memory. My storage consists of a 3 drive SATA-150 RAID 5 array on a MegaRaid 150-4 controller, but have recently purchased 4 SATA-300 drives and an MegaRaid 300-8x card. Before I begin the surgery, I'd like...

I have two NW4.11 servers to build (hardware upgrade, same licenses). The builder of the current servers fumbled his way through configuring them and we have a mess. He configured them so workstations log into a context. We also have many unnecessary NLMs installed. Our application is...

I just upgraded the hardware on our NW3.12 server. I mirrored the two drives by creating a NW partition of the same size on HDD 2 and inserting the drive in the mirror section of install/disk options. The server eventually completed the mirror. Now when I type "mirror status" the server responds...

We are upgrading our NW 3.12 server to a faster computer. I've created the NW partition, volumes and have copied all the files from the old server to the new server. The new server is also running NW 3.12. The final task is the user accounts. Does anyone know how to back up the bindery on the...

Hello all, I have a NW 4.11 server running NWIP and FTP services in Wyoming. Until today, this server was also the main file server for that facility. To decrease risk, we decided to install a second NW 4.11 server for file storage and leave the original file server in place to function as the...

Hello All, We have an database application that run 24/7 that must live on NW 3.12. For the past 10 years, any change to the database prints to a dot matrix printer connected to a NW print server. The Epson Printer is fed various printer codes through the print queue by the data entry...

Hello All, I beleive I have load balancing set up correctly on my NW3.12 server (no errors), but don't know how to test it. I tried unplugging the primary ethernet cable and I lost communication to the server. Does anyone know how to test is load balancing is working on my server? Here's the...

OK, here's my final issue with the new server... I'm using a E100B ethernet card. When Ethertsm.nlm/MSM.nlm are loaded, I get 7 "loader cannot find public symbol" messages. I updated the server to the latest 3.12 ODI patch posted on Novell's website and still get the message. The...

I have a single 29160 SCSI card w/ 2 37 gig Ultra 320 drives. Netware reports the following under mirroring (before creating the mirrored set): In Sync - Netware Partition #2 on Device #0 In Sync - Netware Partition #3 on Device #1 Partition #2 contains the data, so I hit enter on partition...