Search results for query: *

I have a Merlin legend R7 iwth a PRI. I want to have an inbound call that comes in on a specific DID ring at multiple phones. If this can be done, what are the restriction regarding number of phones and number of simultanious calls

My system is running hybrid/PBX and and some of the ext operate like a key system, 8 lines on a MLX-28 configured as line appearance. I want to program the managers phones so if they pick up a line, no one else can listen in by picking up the same line on their phone

is there a way that I can have an phone with both an existing ext number (101) and also add a DID from my DID pool (239 -259). I have a MLX-28 and for part of opur business we have 8 POTS lines set up as line appearance on individule buttone. I would like to add an incoming line as a direct line...

Can you have 2 Merlin Mail systems on 1 legend system?

I am tryimng to get into my admin mailbox and what I thought was the password does not work. I fond on this site instructions using the seriakl number to reset the password. The proble I have is there appear to be 2 serial numbers. They are on small (3/8" x 1") lables that are over the edge of...

This may be a stupid question, but can I have both a PRI with DIDs and 12 POTS lines in the same system. I want the POTS lines to show up on each phone like a KEY system and the DIDs to go to specific phones only. For the DIDs, I want to have a sales group that has 10-12 phones each with only...

My provider is asking me for answers to the following configuration questions for a T1. My system is configured in KEY mode and I want each line in the T1 to appear on a seperate button (line Appearance) on my phones. I have 3 digit ext nimbers Inbound/Outbound –signalling--- Immediate , Wink...

I picked up a DSS for my Legend system, but it did not come with a cable. After looking at the connector, it is not a standard RJ-45. Anybody know where I can but some connectors or cables? If I can get the connectors, will a standard RJ-45 crimp tool work?

I just got my PRI turned on. I want my Legend R7 system to act like a key system, in other words, I want all 23 channels to appear as seperate lines on all phones. I have all MLX-28d, so there are enough buttons. MCI is the provider and they gave me 23 DIDs, but I do not want individule stations...

Can anyone give me some help on configuring a Paradyne 3160 to interface to a 100D. I have a PRI configured as 23 voice channels and caller ID on the D chan. Do all I need to do is set it to a factory default or is there more to do? Thanks in advance

Does anyone know the pinouts for connecting a 100D to a Paradyne 3160. I did not get a cable with my 100D

I am changing from POTS lines to a PRI. I bought a T1 card on Ebay that was described as having the built in CSU/DSU. How Can I tell if it actually has it builtin? The card says 100D 1 DS1 trunk on the front lable. On the top of the clasmshell there is ba lable that says AT&T 517B15. Did I get...

I know there is an easy way to find out what extension an phone is. I forgot what to push on the keypad

I am getting a PRI configureed for my Legend 7.? system My provider is asking a ferw questions I do not know how to answer. ANY help is much appreciated. 1) CO protocol They have down ATT,NTP,N12 (it all greek to me!!) 2) Digits I am having a block of 23 DID numbers being asigned, but...

I am getting ready to add more lines to my system. Currently I have 9 inbound trunks using 408MLX cards. I want Caller ID and I have been told I need to get a PRI rather than a T1. The cost is the same, so it makes no difference to me 1) Is it correct that I need a PRI 2) Can I get Caller ID...

I am looking a buying a Transtalk 9031 on eBay. In speaking with a previous buyer of one from specifit vendor, it turns out the phone being sold is a DCP9031 and he was told it only works on a Definity system. Is that true for DCP9031. I am also looking at an older MDW 9000. Will that work on...

I have an external Merlin Mail for my Legend system. How can I find out the exact hw and sw rev?

I have a Merlin Legend system R7 V14.2 with Merlin Mail R3 set up as a key system. I am trying to set up the voice mail/Auto Attendent so all lines/phones ring at least 4 times before the auto attendent picks up. I have delayed ring turned on in the mail system, but the auto attendant still...

I have not been able to find the wiring plan for the MLX phones in any of the PDF manuals I have downloaded (maybe I missed something!). In searching this forum, I came across a post saying that you only need 2 pairs for the phones if not using a DSS or the MLM cards (I am not using either)...

I am a putting together a legend system form my office. I have gathered together from ebay a r7 processor, 3x408 mlx, 012 with ring and a bunch of phones. I can't decide which VM to gop with, the internal or external. I have been told that they are functionally the same. I have ordered a copy...