Search results for query: *

I HAVE CONFIGURED A PORT (SHOULDN'T HAVE) WHEN INSTALLING AN HP PRINTER. THE PORT GOT CONFIGURED WITH THE SAME ADDRESS AS THE HP. I CANNOT DELETE THE PORT. I GET SOMETHING LIKE "THIS OPERATION CANNOT BE PERFORMED". AS ADMINISTRATOR IT LOOK LIKE I HAVE ALL THE BLOCKS CHECKED TO MANAGE THE...

The WYSE console (CRT) has gone bad. I have been able to connect to a laptop via numerous gender menders and use hyperterminal to a very limited extent. All I get displayed on the laptop is what has been buffered for the WYSE. What am I missing to get the ack/nak operational? The enter key is...

Our WEB hosting has expanded and we need to move to a bundled T1 setup. Mgmt wants to bundle 4 T1s. OK, that means 4 DSUs/CSUs. The question is, what do these connect to to combine the 4 T1s into one data circuit? Doug

We have installed a DSL (in bridge mode). The server is addressed with a public IP via the PAT. The server is accesiable from the WAN side, no problem. The PC's can browse the world. The server can be reached from the PC via the private address. The server cannot be reached from the private...

I have a executone PA system, model unknown. It has been used but unmodified / untouched for 10 years. We dial 118 from our phone to get to the PA system. then dial 1 thru 9 depending on the floor we want to address. Example: Dial 118 then, 1 for the 1st floor etc. 2 for the second floor, 6 for...

The campus has a 3.0/512 DSL; I believe the router to be a Zyxel. This supports 4 buildings on the campus. All address are provided via DHCP. I want buiding 1 thru 3 to continue to be DHCPd from the phone-co provide DSL equipment. I need to build a network in building 4. Therefore I need 150...

We have connected CISCO CM and out Nortel 11C with T1 CAS. Point to point calls and ad-hoc calling is working fine betwenn the systems. We installed 3rd party software to do "blast out" conference calling. This permits conference calls to be initiated from a 7960 quick dial key for 12 or so...

Apparently I missed something in the 11C config to enable calls to Cisco call manager. Every call starting with a "6" should roll over to the trunk to CISCO. I get a quick busy and an ERR624 on the 11C console. ESN datablock or NTCL pointer invalid or missing. Can someone point me in...

We cannot install a Dchannel card in our Nortel 11C. It needs big bucks hadrware and software upgrades. We don't care about caller ID etc. The PBX is configured with everything necessary to connect to call manager. The CISCO side of the connection is a port on a 6608 blade in a 6509. We need to...

For security purposes, I need to silence the speaker on 2616 sets for all functions except ringing. HFD will not fit the bill. Manual speaker volume control will not either.

There are a number of config examples for an 11c voip to CISCO voip setup. Can anyone direct me to a link that has an 11c non-voip (Rel 23) to CISCO voip.

1. The TI/PRI card NTAK09BA is installed. The 11C is non-VOIP. I want to connect to a 6500 VOIP system. Do I need to migrate to Release 25? 2. The NTAK20AD clock controller card is installed, do I also need the NTAK93 D Channel daughter board? The Nortel is internal to the campus as well...