Hi,
got another issue, I've a 64Mb PCMCIA flash card and copied an IOS image onto it via my PC. I then placed it into the slot0 of my 6509 Sup II but when I do a "dir slot0:" or sh slot0:" I get an error.
I've tried formatting the Card using the "format slot0:" command but it fails when I reach...
Hi,
can anyone advise the advantage of going from CatOS to Native IOS on a 6509 Sup II?
Also is there a dependable procedure? Is it risky?
Is there a back out procedure if it goes wrong?
Any tips are most appreciated.
Regards
Paul
Paul Kilcoyne B eng. CCNA
Hi,
I have a 4400se Switch and various other 3coms Switches I'm auditing. I need to find where on each Switch certain Servers are connecting i.e. on what port/ interface they are connected. I can easily do this with a cisco using;
sh ip arp xx.xx.xx.xx
where xx.xx.xx.xx is the IP address of...
Hi,
I'm doing up network diagrams. I'm using the connector buttom on the standard toolbar to represent cables connecting devices. Once I've added the connector I double click on it to add some text. But the test is always horizontal, I'd like it to be "in line" with the connector. I remember...
Guys,
I'm configuring up a 3560 switch with two Vlans. I'd like to use the DHCP feature on the Switch so as to assign an ip address to a user depending on the vlan their connected into. Is this possible?
I've got DHCP working in a flat lan using the "ip dhcp pool" command but it assigns the...
Guys,
we're having issues on our Network. I did a sniff of the LAN and captured 256Mb worth of data. I can see alot of TCP frame retransmissions. Is there a way to set up a filter so that all that is displayed are the retransmitted TCP frames?
Any help is greatly appreciated.
Thanks
Paul...
Guys,
you've helped me out before so here goes again;
I want to upgrade my IOS on a 6513, the device has two supervisors ( sup720 ), each having one flash card. Whats the best way to do this ? Can anyone give me step by step directions ( with commands ) also I'd like to have the old IOS stored...
Hi Guys,
I'm from Ireland and trying to understand how ADSL works here. It seems it uses ATM and PPPoE, can someone explain how they inter-relate or point me in the right direction?
Thanks
Paul
Paul Kilcoyne B eng. CCNA
Guys,
I'm in a bit of a panic. Was trying to erase the config on my 6513 by typing;
erase startup config
but now the Switch is in ROMMON mode and I dont know how to get it back...!!!
Please help........
Thanks
Paul
Paul Kilcoyne B eng. CCNA
Guys,
might seem simple but its stumped me;
SWA(config)#int gigabitEthernet 9/48
SWA(config-if)# ip address 10.68.0.194 255.255.255.252
% IP addresses may not be configured on L2 links.
SWA(config-if)#
Can anyone tell me how I get around this issue?
Thanks
Paul
Paul Kilcoyne B eng. CCNA
Hi,
I have two 6513 Switches A & B with SUP720 Supervisor Modules.
I have them connected via trunk Ports. Both have VTP enabled A being the Server and B the client. I have 3 Vlans set up 1,2 ( 192.168.1.1 ) & 3 ( 10.30.20.1 ). I set the Vlans up on Switch A and have users hanging off ports on...
Guys,
just another Q;
I have two 6513s linked via SUP720 gbic interfaces as follows;
6513A SUP720(slave)prt1---fibre--prt1 6513BSUP720(slave)
10.30.5.1 255.255.255.252--------10.30.5.2 255.255.255.252
But I cant ping between the two even though the stats show link and protocol up on the...
Hi,
I'm trying to upgrade the IOS on two new 6513s. My problem is I dont know to where in memory I should be copying:
copy tftp flash ?
copy tftp bootflash ?
copy tftp sup-bootflash ?
Can someone please explain the difference between these and advise me as to which one I sould us?
Thanks so...
Hi,
I've added a webpage to my favorites and want to make it available off line.
So I ticked the relevent box. Went into customise and ticked yes to making
links to other pages available offline too. Download pages 2 links deep from
this page. That was it.
My problem is that when I run...
Hi,
at work we have a number of different Cisco Switches with 48 port RJ21 Telco Cards. I have an issue with assinging ports to vlans;
1. On the Cat5000 can you assign one port to a certain Vlan and another port to a another Vlan when both Ports exist on the same Telco Port block e.g. ports 1...
Guys,
this is wreaking my head!!! I've a visio document with multiple pages each representing a computer Room on each floor of a Building. I have networking equipment in each drawing and would like to create a Report showing the Custom Properties of each Device and also to which Page the Device...
Hi Guys,
I've made a Visio document with multiple pages. On one page I use a hyperlink to jump to another section of a different page. To use the hyperlink I have to hover my mouse over the Hyperlink and then right click and select the hyplink. Is it possible to "double click" on the hyperlink...
Hi,
I have two lists of IP addresses, I want to compare list A to list B and output what does not match from list B into another Column. Does anyone know how to do this?
I have a macro that will output the matches in both Lists below;
Thanks
Paul
Sub Find_Matches()
Dim CompareRange As...
Hi again,
I'm setting up two Wireless Hotspots for two Cafes of the same owner. Each site would have a broadband ADSL link to the internet. The Owner would like the two Cafes to have some sort of WAN link between the two Cafes over ADSL. So I thought a VPN would work.
1. Would VPN work?
2. Is...
Hello all,
If you can help me with this I'll be delighted. Anyway here's my question....I'm setting up a wireless Hotpsot in a Cafe but I'm wondering will users be able to access their email using Outlook, Lotus notes etc. without having to change their POP3 server or SMTP server settings? If...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.