Search results for query: *

Hey, i recently swapped out an ESM on an existing DS4800 configuration. We upgraded the firmware level on this card to match with the other ESM in the enclosure, but now are seeing an error regarding the card's "configuration settings file". Storage Manager sees a value for the other card (FD...

Hey ne1 know how to force a drive to rebuild that has been marked as "replaced" by a hot spare. we did a disk failure test here, and choosing "reconstruct" in Storage Manager will not work. tia

Hey, we've recently upgraded to HMC 7, and i'm having trouble opening a terminal to a managed server, i get the following error: The task you want to switch to is an applet based task, which does not support 'Switch To'. Please use the window switching capabilities for local windows to 'Switch...

Hi, I'm attempting to manage an IBM DS4800 disk array on a private LAN from a RH box where the display is actually run over a LAN interface on a ubuntu desktop. the RH server is dual homed. i can successfully tunnel the app through ssh up to a point. the main screen is fine on start-up, but...

FWIW, was upgrading some p5 boxes to 5300-07-01-0748 and had a few fail on about 200 of the file sets due to missing req's. Apparently installp was trying to bump bos.rte to level 6 and could not find it on the media. in comparing installed software with boxes that upgraded ok i found, and...

My first foray into a DS4800 array and i have some questions: 1. where do i find devices.fcp.disk.array.rte? 2. in a scenario involving multipathing/load balancing LUNs, would you typically zone two HBAs in a single host each with a single controller? i.e., HBA1 with controller A, and HBA2...

AIX Security Expert is a system security hardening tool (TCP, NET, IPSEC, system, auditing). It saves time and ensures that all systems have the proper security configuration in an enterprise environment. It was added to AIX5.3 in TL6 (Aug 2006). AIX Security Expert integrates over 300 security...

Hey, i have been trying to install a mksysb onto a new 55A using a nim server. box appears get its boot image fine, but halts shortly after displaying the boot banner on the console with a 0605 (Configuration of physical network boot device failed?). the 55A is being managed from a HMC using...

i'm setting up a new 55A with an HMC, everything looks fine so far except for the vterm console with the default partition. from the looks of it, it appears the terminal settings are not correct, i'm getting mostly garbled output on the console running through the HMC. i'm guessing the garbage...

Hey, i've got an F50 that was recently upgraded to 5.3 from 5.2. when any user tries to log in via CDE they get a "Login incorrect" after giving it just the user name, never gets to the password part. any ideas? this is our only CDE box, so my experience with it is limited. tia

sorry for asking such a basic question that i know has been addressed here before, but since the search function here is borked, and my memory is fading on the subject... which of these two methods is LEAST destructive for upgrading an existing production host to AIX 5.3 (from 5.2)? i've got...

anyone know where this thing is on an 6H1? we inherited a couple of boxes from another org in our building and it looks like they tried to upgrade the OS w/o doing the firmware first, so the hosts are hanging at E443. i want to give a stab at draining the battery, but haven't been able to...

Greetings, I'm a SAN administrator and have had one of my users, a windows '03 server admin, come to me with reports of end user complaints of occasional slow file access. from what i can tell, there seems to be no pattern of when this problem occurs. we have done some basic attempts on the...

Anyone seen this happen before? i can boot this host into maintenance and import rootvg fine. but a normal boot causes it to halt after displaying 517. the host was shutdown normally and then later started, no OS or Mcode updates. any suggestions where to look? TIA!

hey, i've never had this happen before on a HMC managed p5, but have lost the ability to log in as root and need to access the vg somehow in order to reset the password. i am able to boot off the install CD, and can see rootvg, and access it before mounting the filesystems. however, if i exit...

Anyone know why IBM has withdrawn ML 5? i got a short blurb from a reseller that oracle boxes should not install this level, but no explanation. ML 5 is no longer showing up on IBM's fix delivery website.

Anyone know how to turn these off on an HMC managed p5 550? i referenced an older post and have not had success with /usr/lpp/diagnostics/bin/usysfault -s normal or going through diags. i've already reconciled these as being due to a power failure. tia

All, taking my first steps into firmware upgrades with an HMC and have a few questions. i'm trying to upgrade a 9117-570 to 01SF240-219 from 01SF225-96. if i go through all the steps according to the IBM documentation i see that the update is available from the IBM website depository, i can...

anyone seen this happen with a brocade switch: ssh -l admin myswitch ssh_exchange_identification: Connection closed by remote host in more detail: ssh -v -l admin myswitch OpenSSH_3.8.1p1, OpenSSL 0.9.7d 17 Mar 2004 debug1: Reading configuration data /usr/local/etc/ssh_config debug1...

anyone know what would cause a 5.1 6m1 host to boot up with only / & /usr mounted? i've fsck'd /tmp & /var. they come back clean, but the mount command returns w/o an error and nothing mounted. same goes for any other FS in rootvg. same thing happens if i place it into maintenance mode and...