Search results for query: *

Hi all Have set up Linksys-Linksys VPN successfully and works great using two model AG241's. The remote site has two subnets. Setting up with one subnet works and all is well. As soon as I change the "Remote Secure Group" to "Any" or 192.168.0.0, I cannot see the remote site, although the VPN...

Hi Can anyone tell me if these switches are reliable. Currently we are using HP procurve switches and the powers above want to get these switches from now on for new sites and add to the existing network to cut cost. I think this may be fals econmy, but having said that I don't know much about...

Ok we have an office argument, which I hope you guys can clear up. On this perticular site we have 12 procurve 2650's and all are cascaded off each other via the 1GB uplinks. All switches have 2 Vlans. Vlan 1 is for data and the 2nd vlan is for IP telephones. All seems to be working ok. Is...

Hi Load balancing using a 2800 with 4 x wic ADSL cards. How does the load balance work? For example if we have 4 x 7MB ADSLs (7Mb downstream, 700Kb upstream). Would this then mean around 28Mb downstream and around 3Mb upstream? I cannot imagine how the packets would get to their correct...

Hi We need to change 10 of our office DSL routers from the standard ISP ones to something that can be a Broadband router and have a reasonable firewall all in one box. Cost per router no mor ethan 200 Euros Any suggestions? Thanks

Hi We have two VLAN's. Default VLAN 1 for Data (192.168.47.0)and VLAN 10 for Voice (192.168.48.0). All ok until we added an 2nd Data subnet (192.168.55.0) to the HP switches on the Default VLAN 1. Now some of the phones are picking up the new range and then getting "TFTP error packet send"...

Hi Rebuilt my pc and forgot the USB flash drive was still plugged in as I backed my documents onto it. I then accedintally deleted it's partition thinking it was the C Drive. Rebuilt the PC and only noticed it afterwards when I tried to restore it. How can I recover the UDB drive partition...

Hi I have two subnets behind an AG241 router. I can't do any forwarding to the second subnet as the forwarding page only shows the primary IP range. Is there a way to do this? I can't find any information on this. I would like to VNC to a pc on the 2nd subnet. Thanks Andres

Hi The RV042 can be configured in Gateway or Router mode. So does that mean it can connect directly to an ADSL line? Currently it is connected to an AG241 router, but only connects in DHCP mode. If I cahnage to static and my PC also then it never connects. Am I missing something? Thanks Andres

I already have a question in the TekTips linksys forum as I cannot see devices on either site past the routers, although the tunnel was connected(doesn't connect anymore) Using AG241.... Anyway, can anyone recommend 2 x VPN routers to use instead. The AGV241's are great, but not sure about VPN...

Hi I have set up a VPN Tunnel between two AG241 routers at different sites. The Tunnel is up and I can ping the remote end router and viceversa, but cannot ping any devices at either end. Site A router LAN address 10.0.0.1 Site A PC 10.0.0.64 (connected directly to the router) Site B router...

Hi HELP! Trying to set up a 871 to connect to the internet. The Firewall Lan port IP is 10.0.0.2 (255.0.0.0) The Firewall WAN port IP 192.168.1.2 Vlan 1 on the 871 IP is 192.168.1.1 I have configured the Cisco Fastethernet4 wan port with our static ADSL WAN IP address, but the 871 wan port...

Hi We have run out of IP addresses on our main internal network 192.168.47.0/24 Been tring for weeks to get this fully working! We just want to add another subnet and be able to browse eachother and have Internet access. VLAN 1 has (192.168.47.241). Added 192.168.120.241 to the same VLAN...

Hi We have a HP 2824 Procurve switch. I need to add another "connected" subnet to the existing main subnet, which is 192.168.47.0/24 It it just a question of adding a route for the seciond subnet? Thanks vlan 1 name "DEFAULT_VLAN" forbid 24 untagged 2-7,9-10,12-15,22-23,Trk1-Trk2...

Hi I cannot change the MTU on the ADSL interface. The fe0 is 1500 and the Firewall WAN port is set to 1404 (recommended by Sonicwall, but the ADSL int is at the default mtu of 4470. Tried everything to change this but still shows the same. Not sure also to change thre FEO to 1404. Trying to...

All our devices including pc's and servers are on the same internal 192.168.40.0/24 subnet. We are thinking about purchasing a Sonicwall 4100 and will want to configure one of the ports as a DMZ and move all our servers to it. But this means changing their IP address to another subnet. The...

This is driving me crazy. I set up VPDN on the c2800 (with help from this forum) and worked a treat with encryption. Now after several weeks it will not connect unless data encryption is unticked on the XP client. It actually verifies the connection ok but fails to register on the network. Error...

We currently have an 8Mb ADSL connected to our Cisco 2800. Sometimes the ADSL is really even at weekends when vet few people are in. Is there a way to check the current upstread/downstream speed is? Would be very useful. Thanks Ski

Is there anything special I have to do for the Mac? VPN works from WinXP but can't get it to work using a Mac. Thanks Ski

Doesn't connect to a Linksys RV042 using Cisco VNP client. But using another VPN client does. Tried same settings but still no good. I would prefer using the Cisco software as I already have this. The other is a 30 day trial! Is there anything special needed to get the Cisco VPN software to...