Search results for query: *

I have 3 xbox's that I need to forward multiple ports. I have found multiple examples how to port forward one port to one host, Is it possible to forward ports to multiple hosts? I need these ports forward to hosts 172.31.1.50, 172.31.1.51 and 172.31.1.52 Port 88 (UDP) Port 3074 (UDP and TCP)...

How do I enable Radius authentication on a 6500? Here is what I use for a 2970 but the 6500 doesn't have the radius-server command. radius-server host 10.12.1.10 auth-port 1645 acct-port 1646 key 7 ********* radius-server source-ports 1645-1646 aaa new-model aaa authentication login default...

Posted by: elovelace256 Oct 31, 2007, 11:57am PST I have a 501 at a branch office that I need to port forward www, ftp and rdp to 3 diffrent hosts. The outside interface is dhcp and the inside is 10.50.1.3 the network is 10.50.1.0/24 Below is what I thought would work but it is not...

Is there a way that I can monitor if a vpn tunnel is up or down? I know you can do sh cry isakmp sa or via the asdm but that does not alert me if a tunnel is up or down, or give me any historical data about the tunnel. I tried via solarwinds but it only lets me monitor the interfaces and not...

Can someone see why I can ping from vlan 25 to vlan 5 and vlan 5 to vlan 55 and vlan... ect ect. I can't figure this out and would appreciate quick help. Thanks in advance! Current configuration : 4430 bytes ! version 12.1 no service pad service timestamps debug uptime service timestamps log...

I have a 2800 series router that I have specified the ip's for both interfaces, enabled routing, put the default route in and made sure the interfaces are up. I can ping from the outside interface to the next hop and get a reply. But if I ping from the inside interface or a host on the inside...

I have two 2801 routers. One of the routers has a t1 wic. The outside t1 wic has an ip of 10.1.1.1 and the inside has and ip of 10.1.1.2 The second router is a vpn connection that will be used for redundency. The inside ip is 192.168.1.1 and the outside ip is 10.50.1.1 How can I set these up...

I was send this configuration and I cannot get this command to work. Can someone please help? interface Serial0/0/0:0.575 point-to-point I get this error % Invalid input detected at '^' marker. and the marker is at the 0 after the : This is on a 2800 seriers router Thanks in advanced

I have a pix 501 and have been banging my head against the wall. I need to open ports • UDP 88 • UDP 3074 • TCP 3074 for xbox live. My outside interface is dhcp and my xbox ip is 10.6.1.12 How do I nat 10.6.1.12 and create and access list for those ports? Much help is appreciated

I have setup vlan10 and vlan 20 on two 2950 switches I also have a 2600 series router. I know I have to create sub interface on the router but my question is do I have to create a sub interface per vlan? and do I have to create a sub interface for each interface on the router that I want to...

Is there a way to hide a text field based on no records being retuned in the details section? Thanks.

I have a table that holds service dates. How can I have crystal go through the database and select the last service date for a particular or each customer? Thanks a million!

Is there an eaiser way to write this expression? Every time the SvcFrequency increments by 1 the service date goes up by 7. if {ServiceInfo.SvcFrequency} = "W001" then {ServiceHistory.ServiceDate} + 7 else if {ServiceInfo.SvcFrequency} = "W002" then {ServiceHistory.ServiceDate} + 14 else if...

I have a table that hold a couple of fields. STARTDATE - The day the service starts FREQTYPE - This field tells me how often a schedule occurs. Here are the vaules -1=oncall, 0=days, 1=weeks, 2=months FREQPERIOD - This is the number of days, weeks, or months between services. a value of -1 would...

We have a cisco 2600 series router that is exeriencing high cpu usage. The bandwith usage is only about 20% on a 100mbps pipe when this happens. When the bandwith is below 20% every thing is ok but after that mark it pegs to 100% usage and connectivity is droped. I have looked at the ip input...

I have an issue where I am trying to add my ip address to the acl for snmp on a cisco 2600 series router. My issue is what access list is it? The previous network admin set up a ton of acl's but I am not forsure which one is for snmp. Is there a list that tells me what acl id is associated with...

I am building a custom pc for my boat but im worried about the HDD taking a beating from boating. What can I do to reduce the shock? Thanks for any help

Here is what I am trying to do What I have created is a simple photoalbum. when you click on a picture it takes you to another page called say freinds_detail.asp. Now depending on what pitcure you click on the url will look like this freinds_detail.asp?pic_id=1 All of the information on the...