Search results for query: *

Is the ASA 5505 capable of doing 1 to 1 NAT? Every configuration I've tried hasn't worked, but then again, I'm used to the PIX series. Does anyone have any good links to config examples that encorporate 1 to 1 NAT? These are the commands I'm using (yes, the x's are public IPs): access-list...

Ok, I've inherited a VCX Connect 100 system which is using the internal gateway interface with 2 - 4x Port FXO cards and 1 - 4x Port FXS card. We are using analog circuits from the PSTN (obviously). The system seems to work fine except for when a caller hangs up before the call is answered...

Ok, apparently I'm not understanding IOS 12.4, I hope someone can help me out here. Am I missing an ACL or something that is keeping the forwards from working? Thanks! version 12.4 service config no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug...

Here's the config: version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Vid-ConfRouter ! boot-start-marker boot-end-marker ! enable secret XXXXXXXXXX.. ! no aaa new-model ip subnet-zero ip cef ! ! ! ip audit po...

Is there anyway to keep the 3524 from forwarding DHCP packets to a specific port? Specifically one of the GBIC uplinks without having to VLAN the traffic. Thanks!

I am trying to allow internet access through the router while keeping the tunnel up; the tunnel functions with no probs. Ok, if anybody can help me out here I would greatly appreciate it. I know I am doing something stupid here, but when you get so frustrated the obvious answers become the...

What's the general feeling so far about 3com's VoIP products and systems? A+, i-Net+, MCSA, MCSE, CCNA

I am trying to get together numbers on what the current "average" commission is for IT based sales staff. A+, i-Net+, MCSA, MCSE, CCNA

Could someone direct me to a programming guide or maybe even just be able to tell me how to program this system to use Music on Hold? A+, i-Net+, MCSA, MCSE, CCNA

Ok, all of a sudden today, my remote locations could no longer hear their caller. I have 3 remotes linked in through BEFVP41 routers. Each location has a router, and their is a main BEFVP41 router at the HQ which is in turn, linked into a cisco 3661. Until today, it has worked like a champ...

Ok, I have my internet temporarily routed through a Linksys BEFVP41 router. The current setup is like this: Internet -> BEFVP41 -> Cisco 3661 I have it like this while I am waiting for a new DSL connection to hook my PIX back up. Then, it will look like this: Internet -> PIX -> Cisco 3661...

Ok, I have a VERY cheap setup for my remote locations. I have a dedicated SDSL at my main facility with a Linksys BEFVP41 VPN router. This is in turn connected to our Cisco 3661 router on the 2nd ethernet port. The remote locations have SDSL speeds comensurate with their bandwidth usage...

Yes, this isn't standard, I know :-). Ok, here is the situation, I have 2 locations. Location 1 1.1 SDSL connected to a BEFVP41 Linksys router (new version with the Cisco logo). The BEFVP41 is connected to an ethernet interface on a Cisco 3661 router. The 3661 is connected into our network...

I have a user who used to be able to use the arrow utility to click and drag any line of text she wanted, irregardless of whether it was in a paragraph or not. However, since getting a new computer she can only grab paragraphs, or lines apart from other lines of text. What is the setting I...

Ok, here is the situation. I have an IP network running CCM 3.14. One of our locations is still running a centrex based phone system with an overhead paging system. They have the overhead paging device hard-wired into a centrex phone which is the device that allows the interaction between the...

Once I have the static entry setup on PIX, along with the ACL that defines the traffic pattern, do I need to set up anything on the router behind the firewall?

I am setting up video conferencing on a machine in my network. I know I can do port forwarding on the router, but is there anyway to open the ports I need on the PIX firewall for just one machine? Or would I have to open them for the entire network?

I am new to the realm of CCM and was wondering if there is a way within the program itself to do a touch-tone voice menu? If not, is there a 3rd party app that will do it?