Search results for query: *

I am trying to use our Cisco ACS Server and our Cisco ASA & PIX firewalls so that when a user tries to login the firewall it will authenticate with ACL and then permit a list of allowed commands and user priledges via what I have configured in ACS.. I cant find anything on how to do this, any...

I have a few Cisco ASA 5505 and ASA 5510 Firewalls that I have asked out DHCP team to reserve me an IP Address for these Firewalls but the issue is that when Microsoft see this ASA's Interface 0 MAC address its a many characters long. How or what are others dealing with this issue. If I do a...

I have a router (Cisco 1751) that is doing DHCP and also reserving a range of addresses also. Now what I want to do is also reserve an IP Address to a specific MAC Address. Currently my dhcp setting look like this ip dhcp excluded-address 10.89.1.1 10.89.1.100 ! ip dhcp pool Pool1 network...

Our company will be switching External addressed shortly and want to see if you all can help me make sure I can so this and do it correctly. Currently our Cisco 1700 series router are doing a Site-2-Site back to the main office (3000 series Cisco Concentrator) head end device. The routers...

This is a fairly new setup for me aside from doing site-2-site 's. I have a router the is being used for one our our sites to use for internet access and DHCP & NAT. What I want to do is block internet traffic from my public network by appling an access-list on the outside(internet facing)...

I just setup a router at our remote end and im trying to setup NAT to the inside and also allow the router to provide DHCP on the inside interface.. They will be getting DNS from their ISP so the only thing the router is doing for this site is internet protection and port 1352 Lotus Notes...

I belive the answer is no but I want to confirm. Currently one of our remote VPN Sites is trying to use Checkpoints Secure remote VPN Client to access a remote site. The client is using udp to make its connection. Since we already have a Site-2-Site with our remote office can they launch this...

We currently use Worldcomm for our ISP but thinking about moving to another provider or instead of having 1 provider for both our circuits we want to have two seperate providers. My question is currently we have two Cisco 3000 series concentrator in VRRP failover mode and all of our VPN...

I have a couple questions that I need assistance with I am currently doing a site-2-site VPN using a Cisco Pix 501 to Cisco VPN 3000 Concentrator. Everything works fine but the problem that I have now is that when a use behind the Pix tries to go to a website they are promoted for a proxy...

We are trying to allow PPTP (Microsoft VPN Client) throuh our current Checkpoint running NG code but unsuccessful. We are using Hide NAT's on our Checkpoint Firewall which is breaking things. Does anyone have a work around to making the PPTP/GRE traffic to work through CheckPoint.

One of our sites had upgraded the frame relay circuit from 1.5m to 2m connected to a serial interface. How can I change the port speed so that the router can now handle the new speed or is this done automatically? I run Solar Winds and when I look at the interface stats it still show 1.54mbps...

I am using a PIX 501 to seperater some contractors from out network and only give them access to certain resourses. Currently the outside interface is plugged into our corporate network with a static address and the inside interface us where the contractors plug into. On the inside interface I...

I am trying to upgrade some of our PIX 501 & 506e Firewall which are doing easy vpn back to our corporate firewall. The problem that I am having is that I cant run the copy tftp flash:image or copy tftp://1.100.x.x/pix634.bin flash: I get timeout connecting to tftp server because it is trying...

I was wondering if you can reserve an IP Address on a Cisco 1760 router for the Inside address pool.. Second question is what id the correct command. For example I want to reserve 10.10.10.1 for MAC Address XXXXXX.XXXX.xxx

Currently I have a Cisco 1760 router doing a site-2-side VPN to our head end Cisco Concentrator. Nat-t is enabled... I dont think this can be done but I want to get some opinions. I have a client that is sitting at the remote office end where the 1760 router sits and tries to launch our Cisco...

I am having some majot problems with one of my international routers (Cisco 1760) Currently what is happening is the routers Serial 0/0 interface which is connected to the internet keeps getting peeking with very high Utilization beyond 160% I beleive the line speed is not set properly...

I am wondering why a couple of my routers dont prompt me for the for username or enable secret passoword. Basically when I telnet to the router (1750) I am only prompted for the password and throuhs me right into enable mode?? Here is parrt of my config logging buffered 4096 informational...

I am getting ready to setup an new site-2-site with one of our partner locations. Currently they are using dial-up for Lotus Notes Mail and Internet. The office is fairly small around 12 users and low traffic. The dont plan on growing as far as users but maybe more resources. What device do...

I am trying to create an access list on a newly created DMZ interface that was created on one of our Pix 515's basically the Pix is used to isolate two internal networks. We are using the DMZ to only manage the Pix via SSH & HTTP(PDM) and block all other access going in and out of that DMZ...

OK I am trying to setup a VPN to my corporate 3030 Cisco Consontrator with a Pix 501. What I need to do is either have the concontrator assigned the dhcp address to all the machines connected to the pix or have the pix hand out the addresses. Currently the Pix hands out the addresses but the...