Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: green6
  • Content: Threads
  • Order by date
  1. green6

    C3750 Switch ACL Entries Out Of Sequence

    Has anybody seen this happen on a switch, in particular the C3750; Standard Access-list entries listed out-of-sequence during various show commands? For example: I create a Standard ACL. access-list 3 remark **** Permit some IPs Log The Denys **** access-list 3 permit 192.168.1.2 access-list...
  2. green6

    Definity G3 to Cisco 2800 ISDN PRI - ARS Not Working

    Hi all, I have a Definity G3 V12 that I've connected to a Cisco 2800 router via an ISDN PRI T1. I've tried various configurations but have settled on using QSIG. This is a lab that I'm using to learn how to route VoIP between routers in order to connect remote PBXs. So, when I dial the TAC...
  3. green6

    Bandwidth Equal Access

    Anyone have any good ideas on how to guarantee equal access on a WAN link to the Internet supporting multiple users? The scenario is a router with a T1 Internet link serving up to 100 users. How would I set up the link to give two users 50% of the bandwidth each, four users 25% each, 10 users...
  4. green6

    C3560 MAC Address Aging Timer Inop

    Has anyone had this problem on their C3560 switch: The mac address associated with an interface fails to age out after the computer is disconnected from the interface. The mac-address aging timer is at the default of 300 seconds. I'm running IOS c3560-advipservicesk9-mz.122-37.SE1.bin on a...
  5. green6

    802.1x Implementation

    Can someone help settle an argument between my co-workers and myself concerning 802.1x please. Are certificates from a Certificate Authority REQUIRED to make 802.1x work. I believe that 802.1x should be able to work without certificates, my colleagues believe that certificates are required. I...
  6. green6

    DISA - Direct Inward System Access

    I recently installed a Merlin system with a dedicated phone line for remote admin access, otherwise known as DISA I believe. The line port was configured for DISA with a barrier code. When I try to dial into the system with WinSPM my call gets answered and I hear the three beep confirmation...
  7. green6

    Change Coverage Feature

    I have a G3 V8 and I'm trying to use the "change coverage" feature. I've assigned a feature access code, I've verified the COR, good so far. It works but I have to assign a "security code" on the station form. The sequence of digits is: *1# (change coverage FAC), xxxxx#...
  8. green6

    Caller ID Blocking

    Any one have ideas on passing "caller ID block" feature access codes to the central office? I have a Definity G3V8 with ISDN PRI trunking. All outbound calls have our main listed number sent as caller ID by the telco provider. Some of our users would like to block the caller ID on a...

Part and Inventory Search

Back
Top