I would like to set up a VPN gateway using the PDM. As my company is using the ADSL modem to connect the ISP.
When I want to enable the "enable outside" of vpn pptp, it displayed following error.
Error :
[ERR] vpdn enable outside
Can not enable vpdn on the same interface as PPPoE.
How can...
I implmented two routers as follows, but they are very slow.
192.168.3.0-Cisco1601R <static route> Cisco2501-192.168.0.0
Two segments
192.168.3.0 (A)
192.168.0.0 (B)
When I move a file from segment A to segment B that
it was very slow.
How can I improve speed of my two routers?
I have been...
I could not view the sh ip route, how can I do?
cisco1601R>sh ip route
Default gateway is not set
Host Gateway Last Use Total Uses Interface
ICMP redirect cache is empty
cisco1601R>
Why my catalyst 1900 could sucessfully upgrade to cat1900.537.bin only?
I could not complete the process when I ugraded from cat1900A.8.01.00.bin and cat1900A.9.00.04.bin.
My Tftp server only display this message of transmit error
while sending to 192.168.0.19. the connection is reset by remote...
I bought 2 routers of 1601R and 2501 recently, how can I use the DB60 cable to make the connection between 2 routers on serial0? ‚hhave set the no shutdown and ip address but it
always show the Serial0 is down, line protocol is down.
What can I do?? thank you very much !
1601 setting
ethernet...
How can I upgrade my 2926T ? when I upgrade the image of cat5000-sup.4-5- 13a, it will be corrupted and display
following error. How should I downgrade to baseOS and upgrade my 2926T. As I could not enter in CatOS, it only
display the errors.
Thanks of lot!
Sry r gi.
ATE0
ATS0=1...
Why display following error when I installed the image of cat5000-sup.4-5-13a.bin on cat2926T ??
Help me!
Thanks
Sry r gi.
ATE0
ATS0=1
ROM Power Up Diagnostics of Aug 19 1997
Init NVRAM Log
LED Test ................... done
ROM Checksum ............... passed
Dual Port RAM r/w...
How many higher bandwidth on 2501 router's serial port?
eg. 100baseT for 100Mb
10 baseT for 10Mb
ISDN for 144K
What equipment can suport the serial port? How can I use
the ADSL to connect into serial port at home ?
Could I upgrade my 1900 switch to enterprise IOS? As I could not find the CLI on this switch, why?
Thanks
-------------------------------------
Catalyst 1900 Management Console
Copyright (c) Cisco Systems, Inc. 1993-1995
All rights reserved.
Ethernet address: 00-C0-1D-80-88-E4...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.