Search results for query: *

I had an extension that changed to a different DN (4330 -> 2250, there wasn't a 2250). I went to Dest Codes and I can't add a 4330 Dest Code. I can only get to 433 - I lose the ANY option after the first 3. Where can 4's hide in the system that I'm missing? I've gone through every B2 on the...

Here is a log excerpt of debug on a PRI (NI-2, both sides) during the call setup. [Apr 30 18:33:22] VERBOSE[8692] logger.c: > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: User (0) [Apr 30 18:33:22] VERBOSE[8692] logger.c: >...

I know I'll get beat up by and sent away, but... Here is a log excerpt of debug on a PRI (NI-2, both sides) during the call setup. [Apr 30 18:33:22] VERBOSE[8692] logger.c: > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: User (0) [Apr 30 18:33:22]...

In thread799-846498 there is the question "4) Is it possible to track incoming calls to DID extensions." The answer presented by senk1s is "Yes." the thread then includes a log record that shows DNIS info. Then in thread799-875560 it also shows DNIS in the excerpt. Is the DNIS in each of...

If I understand the steps right, the procedure is: 1) shutdown the NAM 2) connect the CP/150 3) F983 to initialize the CP/150 4) Change the CP/150 to use the secondary set (F91*, F99*) 5) Reboot CP/150 6) Boot NAM The end result is the NAM doing voicemail and the CP/150 doing call center...

MICS 7.1, PRI An extension on the KSU is forwarded to a local number. Local callers calling that extension can connect just fine. If a long distance caller (calling to us) calls the same extension, telco blocks the call with a busy. The explanation from telco is: They block the call because...

I put an ATA2 on a 8x24 DR5 for a cordless. It rings fine if you ring that extension (x420). I added an Answer DN for the director's extension on the ATA2's extension. Other phones that use the director's extension (x401) as an answer DN ring just fine. Is there a limit for how many...

I've read Need ideas on MICS call transfer to remote office !! http://www.tek-tips.com/viewthread.cfm?qid=1370027 DISA on a did number of a PRI http://www.tek-tips.com/viewthread.cfm?qid=1358938 and MICS 6.2 --> BCM50 Interface? http://www.tek-tips.com/viewthread.cfm?qid=1355458 amongst...

I put a fresh build of 5.3 on a 43P (TCP05287) and all went well. I downloaded the latest fixes and that went well. It appeared to bosboot just fine, so I rebooted. Now it won't boot. I'll get the: -------------------------------------------------------------------------------...

mics 7.0/flash 2.0.10/nam 4.1 I unplugged the power to the startalk flash and turned on the NAM. The goal was to get the the mailboxes setup, CCR config'd and such so I could convert next week. Everything went fine. I shutdown the NAM and plugged the flash back in. It doesn't respond to...

MICS 7.0 w/6-port combo fiber. I have two 0x16's on the system running fine. When I add a third, it never comes on-line. I've confirmed power, fiber and simple things. Is there a firmware version difference or something that makes some 0x16's different than others? Both are marked as...

I may have taken some collateral damage in my desire to get to 7.0. My FastRAD and NRU 10 don't want to play nice. I can still config the RAD via F9** but even when I connect Direct I get a "not responding" failure. (Yes, all is set for 19200.) This should all work, right?

I'm taking 4 digits on the PRI, the Flash's ext is the prime on the company's "reception" number (4301, TN 161). If I set the flash to answer AA on 161 to Y, every call that comes in on the other numbers also gets the AA (eg. TNs 162-240). If I set AA for line 161 to N, then I get the personal...

I'm trying to get the outbound working but I can't get past my Cause Code 100: inv IE contents. We have: - 1 PRI, ch 001-023 - NI-2, NSF: WATS - 16ch on the PRI, so I've Deprovs'nd 17-23 - I'm descending, they're ascending - they're using channels: 1-16 - CbC Limits are in: 1,16 and out...

We have one remote employee that I'd like to set up with a VoIP extension. The phone system here is a older Norstar and I have a spare ATA (POTS interface) available. Does anyone have a suggestion for hardware to use? The goal is that he's just another extension on our system. Thanks,

Is there a way to trim the line level on an ATA2 connected to a 824/DR5? FAX repair folks are complaining that I'm outta spec. Ideas? Thanks, peter

I need a token ring card, microchannel, for a 7011-250 running 4.3.3. In order to get a card, I need a FRU/Part Number but I don't have any around to look at. Could someone fire at me the output of the lscfg or their favorite controller info? I'd greatly appreciate it. If you have spares, I...

I have 3 DID cards in the TM in port 3 which worked fine before swapping out the 2-port expansion card for a 6-port expansion card, this is the only part swapped. (DR5.1) After reprogramming tke KSU and setting the lines for DID/wink as before, I'm not getting the dialtone on the lines like I...

I have an 8X24 with three DID cards in the 12X0. The 8X24 is putting out dialtone on each DID trunk. The telco I'm working with figures the dialtone is confusing the swtich and then not handing the call off. The net result is that calls to numbers that drop to these DID trunks seem to seize...