My customer wanted to separate their servers from their pcs so I built 3 (they have three different schools in their district) additional VLANs for them:
(ALL TESTS WERE DONE ON THE 8300 – THE DHCP SERVER IS CONNECTED TO THE 8300.)
VLAN - 20 172.19.1.1 School 1
VLAN - 21 172.20.1.1...
I have a customer that is requesting multiple subnets on a VLAN. He has a Nortel 8310. I called my Nortel rep and he said it wasn't possible.
The research I've done looks like it is called supernetting and since the VLANs havve an IP and Subnet mask it seems like it would be possible.
Has...
Does anyone out there have a manual on this timer? We ran across it at a new customer and they are asking us to make some changes. They of course don't have the manual and I'm used to using a TOA timer.
I have a BCM400 4.0 with a 2245, BAP-120 access points and 2 2210 handsets.
Everything comes up and we can use them for a short while then I get a "watchdog timeout" error on the handsets and they reset.
The BCM, 2245, 2210 and BAP-120's are all at current patches and firmware levels. All...
I just had some tech's load an OPT11C with the default database prior to installation. They will be installing a CP server and will not using slot 10. The default DB comes up with MM in slot 10 and they need that slot for a trunk card. How do we reconfigure the slot!?!
Thanks ahead of time.
I have a new BCM400 3.7 with all new patches. It supports about 90 digital phones and only 9 i2004 VoIPs fed by 8 analog CO lines. The 2004's are on their own network consisting of 2 Nortel 5520-24 switches connected via fiber.
My issues are echoing only when the Voip's are connected to a...
Anyone out there know where I could get a Manual on the Norstar DS30 Station port adapter? Couldn't find anything on Nortel's site and ITAS couldn't find one either.
Thanks ahead of time.
Can anyone send me a copy of this? My CallPilot training course refers to it but when I go on the web Nortel says it can't be found. Currently setting up a CC and having a few problems getting the skillsets to work properly.
Thanks Guys
Using Outlook 2k. When I compose and new email and press the To: button. The address list that comes up does not have my all my Contacts in it. I can go to contacts and find it and email from there just fine. When I hit the To: button, I only have "contacts" as a choice. If I right...
Looking for the port number to open for access to the CP100/150's during a TELNET session. I'm able to TELNET into the customer but can't remember what the port number is for accessing the CP's admin page. Anyone out there know?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.