Search results for query: *

We have a spectralink i640 system (i640 handsets) running SCCP over our network and have a SVP100 (model #SVP101) controller that prioritises the voice traffic with our cisco aironet access points. We have had this system running very smoothly for over 2 years. Recently, the SVP controller...

Been looking around for a way to build a field with a custom value. I can seem to only get half way. Need to create an ID based on the values of the created field, department, category and title all in the form of a string working with the date in a calculated field is ok, however working with...

Hi there. Been doing backup to disk with backupexec for a long while however I wanted to expand the availaibility of drives for a while now. Just running into a small problem. Using a whitebox server with an ASUS board with an ICH5 southbridge and onboard SATA. The data/os drives are on an...

I have a callmanager v4.2.3 cluster on two servers. Recently my subscriber crashed and I had to reinstall the OS. My original install disks for callmanager are v4.1.3. Is there a way to bring the subscriber back up to 4.2.3 without brand new 4.2.3 install cds? Please advise. Thanks

I upgraded to unity 5 a little while back. Ever since then when you call into a users voicemail you quite often get a LONG pause of like 10 - 15 seconds before the greeting starts playing. Just dead air. It was doing this with both exchange 2003 and 2007. Running unity 5 on an HP DL320-G3...

Anyone using Callmanager 6? Is it mature enough to consider upgrading? Currently running on v4.2.3sr3 I have an upgrade pack to go to v4.3 which will be doing soon. However, I do have SASU so am entitled to v5.x or v6.x. I know they're both linux/appliance based. Just wondering what your...

Hi there. I have two configurations of fax. Standard analog fax machines plugged into one port of an ATA186. I also have 2 fax modems on a server for fax broadcast. They're each plugged into a port on an ata186. I find that a standard fax machine on an indentically configured ata will work...

DHCP Server on windows 2003 server on vlan1 DHCP Relay on Dell 6024 aggregate switch with routing and multiple VLANs on different subnets I have a multi vlan network with a DHCP server residing on vlan 1 with a subnet of 10.0.1.0/24. I have vlan 10 with a subnet of 10.0.10.0/24 workstations...

Hi there. I have two AIR-ANT2506 antenna on a mast with an aironet 1310g access point. I have this mounted to the roof of my building. I recently installed this, trying to get wireless phone coverage of our parking lot. The problem is that, even when the ap is on its own channel, I can only...

Hi there. I have two AIR-ANT2506 antenna on a mast with an aironet 1310g access point. I have this mounted to the roof of my building. I recently installed this, trying to get wireless phone coverage of our parking lot. The problem is that, even when the ap is on its own channel, I can only...

Hi there. I have 20 spectralink i640 phones. They have a feature called push to talk where the phone sends out a multicast IP packet that is then r eceived by all multicasp IP members and pushed out the speaker. The net result acts like a Radio. However, with my vlan enabled network, and...

I have the attendant console running on CCM 4.2.1sr1. The attendant consoles are working well with a broadcast queue and multiple agents picking off calls. I recently subscribed and implemented call display through our PRI. All desk phones are receiving the name & number of inbound call...

Anyone know how to get PTT functionality working on Sepctralink i640? The phones are working on a cisco callmanager. the Push to talk works independantly of that utilizing multicast packets phone to phone. When I press the PTT button, the unit transmits, however no other phone receives the...

I would like to set up a catch all for unassigned DIDs. I have a phone company block of 200 DIDs that route to my PRI. I only have about 75 or so of them used. The other 125 I'd like to have go to the operator if they're unassigned. If possible, this would be dynamic. Eg, system tries a DN...

I have a new deployment of two ccm servers and a 2811 with a vwic 1 port t1 pri card the router is up, issuing dhcp for phones. CCM is up and calls from endpoint to endpoint are working ok. The router has given CCM it's ip, and ccm knows about it. the router has been able to go MGCP active...

How can you go about setting up CDR? I can go into ld 15 and enable it, but how can I collect the data? I don't have serial access to the unit, only IP access. My OTM doesn't have CDR feature so i'd just need it in text format. I quickly need to be able to find out how our PRI is being...

Is there anyone out there running cisco gear on Dell 3448 switches? I just want to see if i'm the only one. I have 9 3448 48 port PoE switches. Using the newer 7941, 7961, 7970 and 7911 phones that all support 802.11af standard PoE compared to the older phones only supporting proprietary...

I just received a brand new cisco 7970. I'm in the process of setting up CCM, so it hasn't even talked to a server yet. I've had the phone powered up for about a week, and just when I was about to start testing it, the phone turned off and hasn't properly booted since then. Currently, the...

Our message centre greeting is way out of date, and I can't find the corresponding mailbox to change the greeting. Our message centre is configured as #7400. If you have a mailbox on the system and you call 7400 you get your own mailbox, however if you don't, or if you're calling from outside...

Has anyone used push to talk? I hear it's a newer feature of 4.0 or 4.1? I'm seriously considering a ccm solution, and am currently spec'ing out stralink i640s for their push to talk function. I would like to stay with an all cisco soltuion using 7920s if the push to talk is good. any web...