Search results for query: *

I am struggling to find out why two VPN Clients cannot see each other either through Ping, trace, ftp etc The VPN in question is on the main VLAN (100)and I am using a /22 subnet with the third octet being used to identify LAN users (192.168.100.x and VPN users(192.168.101.0) I am using a Cisco...

We have an external contractor providing a service, which involves providing an internal ext for users to call. So I have set up a route pattern to forward these calls out into the PSTN. Route Pattern 6666. Discard digits: predot Prefix Digits (Outgoing Calls): 9001xxxxxx My problem is that...

I am using the ASDM to manage my ASA5520 Firewall On the Firewall Dashboard there is a "Top 10 Access Rules" and the rule taking both second and third place on the inside interface is Rule#0: Source:any, Dest:any, Service: IP, Action: Permit Now as it is rule 0 I have not configured this...

I have a Option 11 with an NT5D51 MICB Card installed giving me 30 Conference Ports. I need to increase my ports by adding another NT5D51 to extend this to 60, so my questionS are; 1. Can this be done to give me a 60 port Bridge or would I have 2 x 30 bridges? 2. How would I configure this on...

Hello everybody I need to start using CA Certificates on my Cisco 3000 Concentrator as a client equipment cannot authenticate using group authentication. Up to now I have only used pre shared keys so I am totally unfamiliar with certificates although I have read up on them and understand the...

I am running CCM 4.1 and have been tasked with adding a second line to an existing device. I have checked up on the Cisco Documentation and where it states I go into device >phone select device and then, "In the Directory Numbers list, click an unassigned line, such as Line 1 or Line 2. The...

Gentlemen I have two ASA5500 working as Primary and Secondary. Last week the primary unit crashed due to a hardware failure, and now the secondary unit is "Primary" or "In Office". My question is, I have a replacement ASA5500 unit and was wondering what would be the easiest way to integrate it...

This Morning I awoke to find that the following message was being generated at around 4000 MPH Anyone any idea how to resolve it? The cables have been checked and traffic is not affected. Any other information required, please ask!! I did note that the software image on the "master" is older...

Hi I am a real rookie when it comes to Cisco, but I need to know how to add a new card to a Catalyst 4507. Is it auto detected, or do you need to add a few commands to get the IoS to recognise the card. and are they called cards or Blades or Modules? I would really appreciate any info and...

Hi I have been given the task of reconfiguring an Alteon 180e. The problem being I only have access to "user" password which disallows me from changing any config or resetting to factory default. The "owner" of the "admin" paswword has since left the company, so...