Search results for query: *

Ran into an issue after upgrading to Windows 10, and Office 2016, not sure which one caused it. Have 2 other users with 10, and Office 2007, and it's working fine on one but not the other. Attached is a snip of the error...

I'm being advised to switch to SIP trunks from PRI I've read that you need VCM's for the SIP trunks. I know there is a VCM card in there, but how can I tell how many channels it supports without opening it up. I'm looking in the IP Office Manager, but I don't see reference to it.

went to an Avaya IPO406 v2 from a MICS. On internal calls you used to be able to tell if person you are calling was on the phone. Can the 5410 be programmed to do that.

I've got a 5610 thats been disconnected for a couple of months, now it doesn't work. Phone goes through the motions and stops at Discover: 10.0.0.61 Phone IP is 10.0.0.98 Can ping both addresses, can't think of any changes to the IPO406 v2

Can you use a member server as the fax server and remove the fax service from SBS. I used to use the SBS box as the fax server, but then moved it to another server. All was well until I removed fax services from SBS. Now I can't install the shared fax on a clients running Vista. XP machines seem...

How can I setup a calling group to go to VM when there is no one logged in? I've seen various posts, with no clear answers. It must be possible, why else would there be a message waiting extension that you can program. The calling group is 770, and the VM group is 7929. I created a MB 770 with...

Here's the scene, sales calls are sent to X153. When he's not there he forwards to X170. 8 other phones in sales have coverage buttons for X170. Here's the problem, fowarded calls do not ring the coverage phones. Is this normal? The reason it's setup this way is Group calling only rings 1 phone...

fsoz (Vendor) Dec 13, 2004 I have a customer using a PBX extender 7000 and a Gateway 7000 on ethernet over a wireless link. Now they want to move it to a point to point T1. The units don't have T1 cards in them, so what would be the least cost method of turning the point to point into an...

Cust. has a CICS with 5 centrex lines, centrex code is 8. Where is it programmed to assume that 8? They dial 8 for line pool A which is set under system programming. Checked routing and dest. codes found nothing. Checked every route from 000 to 100. I can change Line pool to 9, and that works...

What is the best way to set up Merlin Messaging to delay answering during the day, and answer on the first ring at night?

I need to remove trunks from line pool 70, but they won't delete. It was a voice T1 using all 24 channels (809-832)but it now is only 12. I've unassigned the channels under T1 settings, but can't remove them from the pool

I've got 2 Magix locations connected by PRI, each has it's own Merlin Messaging card. All calls are answered by the main location, and transfered to the remote site. The problem is, in the morning, when the operater transfers general delivery messages to their respective mailboxes, she can't...

Does anyone know how to turn the display backlighting on and off on a 7244 phone running on a KX-TD 1232

The system is a KX-TD 1232 with a TVS 100

Where can I find a good guide for setting up a TVS 100 with a KXTD-1232. Panasonic manuals suck. The boot processes in the manuals make no sense. The system I'm dealing with has 2-1232 cabs, and a 2 port TVS-100.

Using a KXTD-1232 with a Minitel-128 VM. Is there any way to forward all extension busy/NA calls to VM without having the FWD/DND light flashing at you? Can it be programmed to be solid? Someone told me you could change the settings in program 990 to make it solid, but the install manual doesn't...

I have a customer whose house is wired with Cat 5. They get 2 dialtones from their digital cable company, and each jack is a homerun. The problem is, you can hear the DTMF tones of someone on line 2, when you're talking on line 1. The customer claims you can hear conversations also. When you...

I have a customer who uses a stand alone 206 card as their phone system. Extensions 10 and 12 work ok, but the other extensions won't allow any outside calling. How were they restricted if there is no central programming?

How do you clear message waiting displays on a Norstar system

Weird problem, call X145, it rings on X127, and goes to MB127. Checked fowarding ect... found nothing. Reset each port, and problem went away,, for awhile. Now when you call X145, it rings X132 at the same time, but goes to MB145. Had customer restart entire system, and problem still exists. No...