Search results for query: *

Does anyone know if you can remove the function of the fixed key drop on 54xx phones? Thanks.

New install IPO 406V2 3.0.69. The IPO is seeing the single PRI card in Slot A as a BRI card? Any Ideas??? 1mS PRN: Monitor Started IP=192.168.1.103 IP 406 DS 3.0(69) AristrePBX 1mS PRN: LAW=U PRI=0, BRI=4, ALOG=0, ADSL=0 VCOMP=0, MDM=0, WAN=0, MODU=1 LANM=0 CkSRC=0 VMAIL=0(VER=0 TYP=1)...

Does anyone know how to program it or install it?

Implemented IP Trunks via CSI and G3I, site is fiber between but getting a BW Prowler error. Also choppy talk path but we are not showing jitter or packet loss on the trace? Should each site have its own Network region? If so why?

Can you use HTTP for file distrubtion on the 46xx phones?

Definity CM1.2 and CM1.3 Setting up an IP trunk and getting this when dialing across it then a fast busy? Any ideas? H.323 sig group is up and fine. Trunk group is up and fine? Just cannot use the IP trunk. Thanks.

Magix 4.0 with Intuity. 3 Cabinets with MLX phones. 8 Copper lines and 1 PRI. The issue is for no reason sporadically throughout the day you go to pick up and dial out and get a busy.....Doesn't matter if long distance or if local etc. The CAS is showing that the PRI is not being overused...

Situation....IPO 406V2 3.0.59 with 3 copper backup lines and 1 PRI. Customer doesn't want to dial 9 to go to outside line. Can this be done? They want to pickup phone on call appr a and dial 10 digit number?? Any ideas?

I know this has been asked before, but is there anyway to have a vmail message into one mailbox be outcalled notified to over 14 telephone numbers at different intervals? Can VB scripting do this??? Any ideas would be greatly appreciated. VMAIL

Does anyone have a step by step on upgrading the VOIP firmware on an S8300 with 3 media gateways? Thanks,

O.k. Tell me if I am crazy.... I have a customer that has an IPO 406v2 3.0.44 with 16 co lines and 1 24 channel t1. DNIS for over 45 toll free numbers coming in on the t1. Each toll free has its own dnis of 4 digits to the IPO. The customer wants the ability to see on their phones, (5410's)...

I have a setup of the following..... IPO 406v2 connected to extreme summitt 300 POE switch then the extreme is connnected to a dell switch. All the servers are connected to the dell switch and all the IP phones are to the extreme. My question is the following. When we ping from a desktop...

I have a cust with many TN747B's. CM1.1 Definity SI. I have been fighting with the provider on issues with the channelbank they are supplying dialtone from. Recently two CO boards 747B's went into minor alarm and are failing tests 1528 and 3999, the maintenance doc's show this as xxx-board...

I have a 406v2 with 35 IP phones running off a poe switch. The phones are 56xx series and all is well. I had today the phones all lock and no dial tone and 1 way talk path? Any ideas, the error log is clean, version 3.0.44 switch and latest firmware everywhere with an Extreme POE switch. I...

This is goofy and I am stuck. The situation is a definity CM1.2 to a IPO 403 2.1.35 via a fiber optic cable with fiber/ethernet muxs at each end. Then into HP 24 port switches. So it is only 2 HP switches and the fiber and our equipment. All calls from the IPO are going out the fiber line...

I have seen this happen to our intuity 4.4 (3) times over the last 3 weeks. The doc's say contact avaya, anybody have this before? Last time we had to reboot the intuity 3 times to clear? Thanks.

Anybody know if you can manually have a user turn off/on their voicemail to email? I have a customer whom wants to give the end user control of whether they can turn it off or on themselves? Thanks,

I have a softconsole which is in telecommuter mode, with a 4610. Calls come into the console and show up on the pc, then point and click to answer, then pick up the hardphone. Is there a way with auto answer turned on the console to have them double click the button on the softphone turning on...

I have 40 new 4610's going in on an IPO 406. We are using DHCP. How can I change the text file to allow DHCP to give the phones ip address's and point to the call server and tftp server. I am trying to stay away from manually programming each phones ip address, call server, tftp server...

Is there a way to have voicemail messages sent to email via an Intuity LX? Somehow like the IPO and VMPro works? Or is there anyway to get a notification of voicemail in a user's email?