Search results for query: *

I have 2 LIMS (BC10CNA129/R1A) which I would like to divorce gracefully. In other words, I want to de-commission LIM 2. On LIM 2 I have removed any extensions, group hunting, group pickups and operators and any traffic recordings and common public directory numbers. Then I did...

I might be beating a dead horse but I have tried x ways to get an external call diversion with BC10 to work. My 1st attempt was like this: cdini:dir=4709,div=2044; (4709 is an EX) (2044 is an ED) <kscap:dir=4709; KEY SYSTEM CATEGORY PRINT DIR TRAF SERV CDIV ROC ITYPE...

I have BC10CNA129/R1A and would like to connect an analogue phone with integrated answering machine (f.x SIEMENS Euroset 5035) to an ELU29 (ROF1375339/1 R7A). This should be simple. I would like however to have the CID for the incoming call displayed too. I read some posting concerning CID on...

I have BC10 and use the numtyp ED to have incoming calls routing over a DIGIUM E1 card that sits in an asterisk box and then routing the calls to another building to an asterisk server which works fine. However - due to the problem of receiving and sending fax over voip, I have been asked to...

1) I have since some time one of my SIU ports stuck. When I log-on, it says BUSY. How can I "unstuck" it? 2)What is the "unit=" parameter in case I want to restart SIU? I have BC10. rgds, devplan

I have a BC10 and my license info says: LICENCE TAG ALLOWED USED ANALOGUE-EXTENSION 240 239 DIGITAL-EXTENSION 128 125 DISA-NUMBER 1 0 EXTERNAL-LINE-CAS-ANA...

I have BC10 (LZY2035153/1/BC10CNA129/R1A) and have setup group hunting for one of our reception extensions. My question is: Per Dynatext, a GH member must not be a secondary extension. Does secondary extension mean ADN? I have setup a DBC 212 with 2 ADN and thought I could use GH to hunt...

I have a BC10 (LZY2035153/1/BC10CNA129/R1A) and want to add a VSU board without upgrading other boards (if possible). Will a VSU1 board (ROF 137 5360/2) or VSU2 board (ROF 137 5360/3) work with my release? Are there any other boards, I need to pay attention in regards to the revision number? My...

I try to setup the following: Someone calls in on a specific (either an ISDN30 or analogue) line and gets a new dial-tone where he can call out again using a trunk of that MD110. The purpose is the following: I can make outbound calls with use of authorization code and by that, the calls get...

I have a school class where I want to provide internet connectivity. Only certain computers should be able to connect to the internet, based on the allowed MAC address. Of those who are allowed to connect to the internet, all browsing needs to go via an external proxy-server, for example...

I have a peculiar question in regards to A2Billing which I haven't gotten an answer yet in the Asterisk2Billing forum and I thought maybe someone here has an idea, if the following could be setup: I have setup extension 222 in extensions_custom.conf for outbound prepaid pin-code authorization...

Anyone came accross useful sites and recent articles on Web scripting that is optimized for handhelds? I try to find out what is mostly wanted in regards to that. Do you need Scripts for PDAs? Visit: www.scripts4pda.com

Which browser would work best to browse any high resolution web pages on a HP IPAQ, HX series. Anyone has experience what is the most versatile browser? Do you need Scripts for PDAs? Visit: www.scripts4pda.com

I have an office (several extensions) where the calls should get diverted to an individual diversion position during certain times.(Like break times.) I know about RODNI but in this case I don't want to divert all incoming calls, but external and internal calls from a certain office. I have...

I am configuring a KX-TDA200 PBX. I have set certain extensions to be unable to call external, using COS level and TRG restriction. On the Emergency number I found out that I can call the Emergency number - as expected but strangely I don´t get any dial tone after dialing the Emergency number...

I tried to load the intrusion patch for my BC 10 (VERSION=LZY2035153/1/BC10CNA129/R1A) without success and I am getting the following error: ------------------------------------------------- AUTHORITY CLASS 7 (C) COPYRIGHT ERICSSON SCIPPT 12JUN04 18:15:57...

I have occasional problems concerning call-logging: I have a BC10 and connected to its SIU port a serial line to a computer which runs a custum made call-accounting software. The problem is that occasionally the call output on the MD110 goes stuck with alarm number 75...

I am actually using MS Project 98 and I need to accomplish the following: I am tracking re-occuring maintenance actions of specific durations. Whenever a due maintenance action (task) gets done, I change the start date and this moves the bar on my Gantt chart into the future with the new...

Is there a way to route or divert incoming calls - lets say from a specific external caller ID number 12345678 (A-number) to a specific extension, like 9876? I have BC10NA129/R1A. Thanks.

I have BC10 and since recently I have some garbage on one of the SIU ports, i.e. what I type appears correctly but the response is garbled. (I use PROCOMM with direct connection.) Port speed and settings seems to be still ok. Any troubleshooting sequence?