Search results for query: *

I’m seeing some traffic from the voice VLAN when sniffing on one of my servers. Mostly broadcast, but occasionally unicast traffic between the CMs and some phones. When I remove the "switchport voice vlan" command from the interface which is connected to the server the traffic goes away. The...

I’ve implemented a shaper to limit traffic to 1Mbps, but it doesn’t seem to be working. Below I can see that 1368000 and later 2912000 bps of traffic is going through the interface but the shaper is not activating. The config is at the bottom, Can anyone see if I am doing anything wrong...

We recently moved from a Serial to an Ethernet link for one of our WAN links on our 2811 running 12.4 Advanced Enterprise (c2800nm-adventerprisek9-mz.124-15.T3.bin). We created a parent service-policy, included the shape average command and the old service policy as a child. Then we applied the...

We have users that are running Entourage 2004 that are missing email. Many users are reporting that they open their power books and several weeks to several months of email are missing. The email is also gone in OWA and searching all their messages for the missing email doesn't turn up anything...

I am trying to create a .adm file that will allow us to set autologin via GPO. I have created the following .adm file, but the policy does not show up in GPMC. CLASS MACHINE CATEGORY "Auto-Login" POLICY "Enable Auto-Login" KEYNAME...

I’m having a PIX with four interfaces Outside – Security 0 Extranet – Security 15 - 10.3.0.0/16 DMZ – Security 50 - 10.2.0.0/16 Inside – Security 100 I am having problems getting traffic between the Extranet and DMZ interfaces. Traffic between the other interfaces works fine. When trying to...

I am unable to get hosts accessing HQ via a site-to-site VPN to be able to access the DMZ. I have reviewed several topics on tek-tips regarding VPN into the DMZ and most seem to have been an issue with not having a NAT 0 on the DMZ interface. I do have a nat 0 on my DMZ interface, but it still...

I am trying to setup a branch office with a site-to-site VPN to our HQ office. The HQ PIX is a 515E with an existing VPN to an existing router at another site. The branch office has a PIX 501. The debug crypto isakmp looks ok on the 501 except it looks to me that it is not completing IKE Phase...

I have a Cisco Aironet I would like to setup with three VLANs: VLAN12 – Secure Wireless VLAN22 – Open Wireless VLAN300 – Management All of our Cisco Devices have their management IP’s on VLAN 300 and I would like to have the Aironets on them as well. I have attempted to set this up and all...

I just implemented OSPF at our site and most everything has worked as expected, but I have a question regarding some issues I am having regarding the redistribute connected. We have a back-bone network (VLAN13) that has four different routers connected to it. Two of these routers are WAN...

We have a Mssqlserver active/passive failover cluster, recently the cluster had to be rebuilt and has been operating as a cluster of one for the last week. We just added the second node back into the cluster, but I am not quite sure if I have to apply sp3a to the new node or not? If both nodes...

The "DNS and BIND" book state that to take maximum advantage of IXFR, you should modify your zone only with DDNS updates and never by hand. This is due to the fact that the server can not tell exactly what was updated during a manual update. So I am curious about how IXFR behaves in the...

I'm trying to put a plan together for my current company to clean up our DNS (It's a real mess). We have both Windows and BIND DNS servers. The ultimate plan is to have the Windows DNS servers server the parent zone (company.com) and the BIND DNS servers server a child zone (eng.company.com)...

I have a AIX system running AIX 5.1 in 32-bit mode on 32-bit hardware. I have a user who is saying that an installation of Oracle 9.2.0.7 client use to work and now does not. All my research has shown that the Oracle 9i can not work on 32-bit hardware. In the release notes it says under section...

We have 7046-B50 and pSeries IBM systems that we would like to be able to power down remotely. Solaris has a "init 5" command that shutdown the OS and powers off the hardware. I was hoping that there might be something similar in AIX. We need this because our AC unit has been very unreliable...

I am looking for a command that will shutdown the OS and power off the hardware in HP-UX 10.20, 11.0 & 11i. Solaris has the init 5 command that does exactly that (assuming a sun4u). But I can't seem to find a command for HP-UX. I've tried shutdown -h, but it just halts the OS. Any ideas...

I have an HP-UX 11.11 system that fails when I try and recompile the kernel. # uname -a HP-UX qa12-hp B.11.11 U 9000/800 543720538 unlimited-user license # /usr/lbin/sysadm/system_prep -s system # mk_kernel -s system Generating module: krm... kmckintfc: cannot find file -- mod_wk.d/krm/mod.o...

Someone in my company mentioned something to me about DNS that I did not think was correct, but I wanted to double check. DNS queries are usually UDP, but if the response is larger then allowed in UDP, then the server will notify the client and the client will make the request in TCP. He had...

I have been working with Solaris for about 5 years now and I have yet to see a server crash because it's root file system is 100% full. I have even done experiments where I purposely fill the root file system just to try and get the system to crash. All of my servers have been partitioned with...