Search results for query: *

I have recently added a wireless access point to my home network and relocated one of my PCs onto the wireless LAN. Here is the basic rundown of my network: Cisco 837 running as my gateway to the web via DSL. It's internal LAN IP is 10.10.10.1 One PC is physically connected to the 837's...

Hi, I'm running an IBM R51 with factory installed W-LAN NIC (Intel 2200BG). Whilst the indicator on the bottom front of the notebook lid shows the W-LAN is 'ready' to go, Windows 2k (SP4) shows "Network Cable Unplugged" all the time. I've updated the drivers, ran diags etc. Is this what is...

I have a Supervisor who would like to make all of his personal reports he's made in MAX available to all other users (as 'public reports'). Is there any way we can do this without each supervisor creating the same 'Personal Report Definitions'? Thanks.

Hi, I'm *really* new to Unix (I'm the Nortel PABX guy here!) so forgive any vague questions here... I have a Unixware 7.1.1 box that displays an odd behaviour. If I'm logged in as a superuser, I try ping and get: # ping hostname hostname.network.com.au is alive If I'm logged in as a "normal"...

Hi, I am attempting to use CDP to allow users in my site with the opt 61c to dial our other office (not an M1) by dialling part of the full number (only the extension). In more detail: Sydney office has numbers that are in the range of 02 8374 xxxx. I'd like our staff in Melbourne to be able...

Is there a way to hide the Terminal Services Client Window if we're using it to run a single app? This is, if we are running Word for example, could I make MTSC only show the MS Word window and not the MTSC one as well? This would mimic the behaviour of Citrix with the 'seamelss window'...

Hi, I had an issue today where MAX 'crashed' and wouldn't come up. Initially I checked the SDI HIGH and HSL and they were OK. Following the NTP's I did DIS SDI HIGH and DIS HSL in LD 48. Then did ENL SDI HIGH and ENL HSL in LD 48. When I did the ENL HSL, the 61c returned 'NRDY'. Next step...

Everyone's nightmare... almost... One of my helpdesk staff has inadvertantly hit the dis/enl toggle on the CMDU for CPU 0. Consequently, my Opt 61c is now running on only 1 CPU with no failover protection. Of course I need to hit the switch and re-enable the CPU - but is it that simple...

We're trying to change the primary NT account for some 'generic' mailboxes and are having issues. Whenever we try to use the 'Primary Windows NT Account' button at the bottom of the general tab of the properties window, we get the following error: The Network path was not found...

I am about to make some changes in LD 16 to the RDB so that I can get CDR info on inbound calls: LD 16 CHG RDB ... CDR... INC - YES etc... According to the NTP, I have to do an ENLC l s c on each of my IPE Trunk cards in LD 32 to make the changes take effect. If I do this, will anyone on an...

I have an Option 61c and have to ask a question... I've understood all about assigning the IP address and configuring a port on the Opt 61c etc, but what exactly am I connecting my LAN to on the Opt 61c? I assume I have to convert the Cat5 plug from the lead from the hub to some sort of serial...

I have my CDROM shared out as V$ (V being the drive, $ being to hide it from general users). This is so I can roam about the building and access CD's from PC's without drives. Only problem is, almost every day, the share 'unshares' itself and goes back to 'not shared'. This doesn't match up...

I am dialled into the PABX at the moment so I can capture the results from a LD 80 ENTC (Enhanced Tracking Function on a TN). The GOTR is working fine and that's not the issue I have. The problem I have is that my TTY session gets logged out [TTY #02 LOGGED OUT 11:19 19/11/2003]anywhere from...

Well, we thought we'd venture into the world of DFS... not a great experience first time up... We created a test DFS share as follows: \\Servername1\Shared. It was shared out as per all the normal DFS procedures - that's not my problem... When users went to browse to \\servername2\shared or...

I have a corporate network with Active Directory and Windows 2000 Clients. I'd like to be able to limit access to specific applications. More specifically, I want to be able to stop people from running wmplayer.exe (Windows Media Player recent versions) and/or mplayer.exe (older versions)...

Hi, I have a low end server with six PCI modems on board. It's a P3/500MHz with 128 MB RAM. It's running W2K server with SP4 and all releveant updates etc. Before we started adding modems and enabling R&RAS, the box ran fine (despite it's modest specs). Since we've enabled RAS, the box now...

Hi, I have a Proliant 3000 with a dead onboard VGA card. It died overnight, and locked up the (W2K) server. Upon reboot, everything was fine except no video output. We've tried several screens - it's definitely the output. I know the server is 'displaying' graphics to an extent because we...

Does anyone know of a way to extract a list of mapped printers that multiple W2K clients are using? Specifically, I'd like to find all W2K clients on my LAN that are mapped to a particular shared printer hanging off an NT4 server. Example: All Workstations that have a mapped connection to...

Does anyone know of a way to extract a list of mapped printers that multiple W2K clients are using? Specifically, I'd like to find all W2K clients on my LAN that are mapped to a particular shared printer hanging off an NT4 server. Example: All Workstations that have a mapped connection to...

I was wondering if there were any alternatives to Microsoft ActiveSync? I have several users with iPAQs all using ActiveSync and all having no end of troubles. Surely somewhere, somebody has made an alternative product? I think everyone who has had the misfortune of dealing with ActiveSync...