Search results for query: *

Is there a way to change an extensions COR from another phone? arenine

I have created a web based label maker for Avaya / Lucent 6408, 6416, 6424, 8410, MLX 10 & MLX 16. It is written in JavaScript and only requires Internet Explorer 4 or higher. I am new to Javascript so it may need a little work. This should be used for small batches of labels. Where should I...

How do I display/status registered endpoints on the CLAN card? I have a G3SI - R11 w/ CLAN and Medpro arenine

I recently installed 3 PRI's on a G3si R11. These 3 PRI's are set up as 1 trunk group on both the Definity and on the telco side. The trunk serves for both inbound Toll Free call and outbound LD and international calls. I have run into one perplexing issue. I have a toll free number that...

A Definity via TN464 PRI connected to a Cisco 36XX router connected to a WAN connected to a Cisco 36XX connected to a Definity via a TN464 PRI. Call Flow ----> ----> PBX-->CISCO-->WAN-->CISCO-->PBX The Cisco boxes use H.323 as the protocol and they act as the gateway and the gatekeeper. As I...

I am wondering if Avaya or a 3rd party makes a web interface to Definity's? Also Does Avaya make an ASA lite? with the ability to limit capabilities. The reason I ask is I manage 20+ Definity sites and want to give site admin's at the sites the ability to Change Names on the PBX and Vmail...

What are the steps to update the firmware on a C-Lan and Medpro? Are there other cards that can be updated? arenine

I have my 4620 working using static IP addresses. I want to take the next step and obtain the IP addresses via DHCP. We use a Unix DHCP server. The Unix DHCP server is setup w/ the address range, gateway, subnet mask and the location of the TFTP server. How do I specify the TFTP server file...

How do I interrupt a PRT command? arenine

Is there a way to send a message to all display phones on a Definity G3Si R11? The network group wants to able to notify users if there is an outage/issue quickly. I could use a broadcast vmail message but I don't think most end users will check their voicemail. Perhaps LWC Any help is...

How do I telnet to a G3? Do I need a CLAN card? Can I do it over dialup? Do the same commands I use in DSA/ASA work? Thanks Arenine