Search results for query: *

Anyone know when and why the BCM050.113-CORE patch was pulled from Nortel's website? It actually fixed a bunch of echo issues we were experiencing.

Getting ready to set up a ISDN PRI to a new LD provider. They (MCI/Verizon Business) says they do DMS-250 / SL1 protocol. Should I set the B-channels up as DID or TIE trunks? Also, they don't know anything about the Rls setting that I will need.

I'm getting ready to change LD providers that I feed via a dedicated T1 (and receive toll-free incoming). Because I'm going to change over from DTI to PRI with the new circuit, and I expect to have to do some changes and testing, I purchased a new TMDI card for my CS1000M and will create new...

Having problems with NRS when trying to get to the Tools > Configuration menu item. We are getting "Problems with this web page" popup indicating problems with a jscript specific line of code. Now, according to our Nortel tech, he is saying that KB918899 has to be removed to fix the problem...

We are experiencing problems on a new BCM 50 with Line 061 where incoming calls can't be answered and don't show up on a line appearance. You can't make outgoing calls on this line either. System has all current patches, and the problem just started after working for a couple of weeks. I've...

Setting up a new BCM 50 with IP trunks to connect to a CS 1000 4.5 with Signalling server. We have local POTS lines coming in to the BCM 50 that we use forwarding to a central ACD queue on the CS 1000. The problem we are experiencing is after the agent answers the call, and transfers the call...

Getting ready to install a couple of BCM 50s next week. Noticed when setting up that someone (NOT ME) didn't order MCDN keycode to go along with the IP trunks we did order. Can someone confirm what we can or cannot do without MCDN activated? We are - not using centralized VM - networking...

Don't use CDR very often, but I'm trying to get CLID on incoming calls and it appears I am only getting the incoming trunk member number. CDR has been set up for a while, and I thought I got CLID the last time I needed it (while using 25.40B; now on 4.5) Searched through previous posts and I...

We have an old Compaq Storageworks 14-slot drive enclosure with 13 drives that we want to reuse for another purpose. The drive bay was previously split into two RAID-5 arrays on a W2K system. Now we would like to use it for a new project on a NW6.5 server using a Smart Array 4200 controller...

Is there a minimum firmware level on M7310 or 7324 phones to work on a BCM 50 system? We are replacing CICS and MICS system this summer with BCM 50s and I thought I saw somewhere a minimum software version requirement. Most of these Norstar systems have been around since the mid 90s.

Can anyone explain what the differences between the 3.1, 3.5 and 3.6 code trains for the 460-PWR switches are? Nowhere can I find any documentation that compares the three versions and what criteria I should use for choosing what I should upgrade to. I upgraded a 460 stack last night from...

How is best way to allow blocking outgoing CLID on analog lines, on a Call-by-call basis. The manuals talk about using feature 889, but all of the docs discuss this in terms of an analog line. My user tried this and it still showed our called ID on their phone.

I found the other day that a fan in our 8600 (8006 chassis) had failed, so requested an RMA under our coverage. Got the new fan tray, pulled the old ones out and put the new ones in; nothing happened. Upon further review, I found that the socket that the fan plugs into on the backplane came...

I have several PP1424s in a fiber ring (using OSPF as the routing protocol). Updated the code some time ago to 2.1.4. About 49 days ago I basically rebuilt the configs on all of the switches to get them to be similar. At about the 49 day uptime mark one of the switches rebooted on its own -...

I'm looking to use up some end-of-year training dollars. However, the travel to get to training is got. Specifically, I'm looking at training on Contivity configuration (1100 and 2600). Global Knowledge offers CD-based and web-based courses on the Contivity, but before I drop the chunk of...

Anyone have any example configs of using a Cisco 1710 VPN at a branch office to build a IPSEC tunnel to a Contivity 2600? I already have several 2600 to 1100 branch office tunnels but I have a need for a simple tunnel and have some old Cisco 1710s in the office I'd like to use. The 1710 would...

Anyone heard what the availability is of the Baystack 5520 switch? Supposedly they are a 24 port 10/100/1000 switch with PoE and were supposed to be out the second half of 2004, and can be stacked with the 5510.

Anyone upgrade to Passport 8600 code version 3.7 yet? I'm considering moving from my old 3.2.3 version up to this, but am wondering if anyone has done this or have had any issues. Version 3.7 has only been out a couple of weeks. Alternatively, I will go to 3.5.x until 3.7 has been around for...

Is there an easy way of changing the IP address of a BPS remotely? Is there a way to change both the IP address and default gateway at the same time; you can only change one at a time through the menu, so there's no (easy) way to reattach to the switch to change the other parameter.

Has anyone had a complete failure of a 8608GBE module in a Passport 8600 system? This afternoon I suddenly lost the complete blade; the LEDs were all amber. Pulling and reseating the blade caused the entire blade to be dead. Luckily, I only had two GBICs in the blade, and I had enough spare...