Search results for query: *

Currently my PIX 501 version 6.2 is working without any problems, but within the next 2 weeks I will be changing the configuration for SuddenLink IP addresses from MCI's. I have no problem saving the configuration to my TFTP server but how do I restore the configuration to the PIX 501 from my...

I have a Dell Dimension 8400 Pentium 4 3.00GHz with 2 GB of memory that currently has raid1 enabled with 2 149 GB disk drives. I will have to replace the hard drives within the next month because the available storage is down to 27 gb. We use the PC for imaging and each week we add 2000 tiff...

We have a Merlin Legend R3 processor with 2 408 GS/LS-MLX boards, and one 007 MLM voice mail with 2 voice mail ports with MLX-5D phones and a MLX-20L console. I had to move our company operator and two other people out of their offices to other locations within the same office area and they all...

Sorry but I did not see an entry under the Communications Rack for LinkSys, but I know somebody out knows the answer to my problem in this area. I have to install a LinkSys router BEFSR41(4 port) to an existing DSL/cable modem from Cox cable. This system will serve as the backup to the...

We have started buying new PC’s with Windows XP Professional and we will be controlling each PC with an administrator profile and user profile. The PC’s will be connected to our LAN and will be using our existing file server. I used the administrator profile to load our virus protection...

Currently we have a CISCO 2600 router handling our internet access on a fractional T1 dsu/csu module for fourteen employees and paying close to $1000.00 a month for the service from MCI. Last week we had an outage that shut us down for an extended time, which in turn had the president of the...

An employee at my company uses a Dell Inspiron 3500 laptop to connect to the Internet and receive e-mail when he is out on the road. This morning he brought his laptop in to connect to the Internet and check for critical updates via our network, which has always worked. When he booted up the...

My system is a Merlin Legend R3 processor with 2 408 GS/LS modules, one 007 MLM voice mail with 2 voice mail ports. When the system was first installed, all long distance calls were routed through a T1 for MCI. Well now the local telco has reduced their long distance per minute charge and...

I have a Dell Latitude CPi that has not been used for a year, and now I need to use it, but after I had charged it for more than 24 hours, the only thing it will display is:"primary hard disk drive 0 not found,No bootable device(s) selected, strike F1 to retry boot, F2 for setup utility. I...

My Merlin Legend release 3.0 with one 007 MLM voice mail with 2 voice mail ports records a different time for messages than what is displayed on our MLX-5d handsets and system console. How can I fix this problem? Thanks Roy

After downloading software updates from any vendor including Microsoft, pc will not restart without deleting 'wininit.ini' file. Must press 'F8' then select option for DOS command line when system is rebooting. If unable to get to DOS command line option, system continues to reboot. Any help...

We have a Merlin Legend R3 processor with 2 408 GS/LS-MLX boards, and one 007 MLM voice mail with 2 voice mail ports. How can I remove all programming from a single extension? The extension has been programmed by the user but they can not remember what codes they have programmed. The...

We have a Merlin Legend R3 processor with 2 408 GS/LS-MLX boards, and one 007 MLM voice mail with 2 voice mail ports. One extension will no longer roll over to voice mail, and I have not changed or modified the system lately. I have deleted and recreated the voicemail for the extension but...

After installing Microsoft’s latest security patch, RAS quit working. Since then I have removed their infamous security patch, but before I found out about the fix, I had reinstalled RAS. My question is: Should I also reinstall service pack 6, if I do, will it affect my LAN or any existing...

Our system is a Merlin Legend R3 processor with 2 408 GS/LS modules, one 007 MLM voice mail with 2 voice mail ports has decided to get squirrelly on me with two major problems. First problem: The operator will receive a call at her station, but when she picks the handset up she hears "If...

All changes have to be entered via the prompt command which was OK for my network manager, but he has moved out of state to another job and my comfort level and knowledge for the firewall is not great. I have been told that PDM is a better way to control the firewall. I have checked DES & 3DES...

I have inherited a Merlin Legend R3 processor with 2 408 GS/LS modules, one 007 MLM voice mail with 2 voice mail ports. We use the MLX20L console for changes and until now everything appears to be working OK except the presidents extension rings once for every call we receive. The system is on...

I have inherited a Merlin Legend R3 processor with 2 408 GS/LS-MLX boards, and one 007 MLM voice mail with 2 voice mail ports. We use a MLX20L to modify or change the system and up until now everything appears to be working OK except, the presidents telephone rings one time for every call we...

I have inherited a Merlin Legend R3 processor with 2 408 GS/LS-MLX boards, and one 007 MLM voice mail with 2 voice mail ports. We use a MLX20L to modify or change the system and up until now everything appears to be working OK except, the presidents telephone rings one time for every call we...