Search results for query: *

We have a Pix 515E with a VPN tunnel established to a Pix 525. Behind the 525, there is a web farm serving content to users behind the 515E. The 515E PATs the user connections across the tunnel and for the most part, everything works ok. During what seems to be busy/active periods throughout...

Today I shutdown an E450 connected to a set of A5000s, both A5000s are setup in a full loop configuration. When the system's power was off, the fiber cables were removed from the 450 while it was opened up for maintenance. Once all cables were replaced and the system booted up, there were 3 out...

I just added 2 A5000s to an E450 running Solaris 7. Both are attached to the server in a redundant single-loop configuration. Each A5000 has 2 interface cards, 1 GBIC per card. Each GBIC is tied into its own HBA in the 450. I believe all the HBAs are using the Qlogic 2100a chip. When I...

I just added 2 A5000s to an E450 running Solaris 7. Both are attached to the server in a redundant single-loop configuration. Each A5000 has 2 interface cards, 1 GBIC per card. Each GBIC is tied into its own HBA in the 450. I believe all the HBAs are using the Qlogic 2100a chip. When I...

An A5000 that was recently attached to a Sun 450 (running Solaris 7) appears to have a few disks in the enclosure that have problems. This is a new array, so before I blindly assume they are simply bad disks, I was wondering if someone could help me interpret the following message: # luxadm...

I have 4 Qlogic 2100A HBAs I need to add into a 450. At the moment I only have 3 free 64-bit slots and by the cards size, it looks like they would have to be installed in those.. I do have an old unused ethernet card tying up another 64-bit slot, so I'd like to remove it and put one of the...

Last night I attempted to retrieve a saveset from a PC Archive pool to a specific location on a UNIX filesystem. I successfully identified the saveset, and once I started the retrieval I noticed through nwadmin that the UNIX client was 'reading' the 30G saveset. It read for about an hour and a...

I have a RAID 5 filesystem that reported a disk failure on sda5 and it has disabled that device from the RAID 5 disk set. That same disk has 2 other active partitions that are functioning just fine, /dev/sda1 and /dev/sda6. I expect this means that the disk didn't fail itself, but the...

Someone made a boo boo and changed all file permissions on an NT system that we have that is backed up with Networker. Does anyone know if there is a way I can recover JUST file permissions on that system without modifying data that may have changed within? Thanks! Troy

We're taking a couple of Windows servers off-line and are trying to make archive backups of the systems. For some reason, the archive is taking a LOT longer than expected. A typical Full backup of these systems used to complete in 4-5 hours. Right now, one of our archive runs has been going...

I was upgrading a system from zlib 1.1.3 to 1.1.4 and I removed 1.1.3, using pkgrm. When I went to install 1.1.4 with pkgadd, it complained with the following error: The following files are already installed on the system and are being used by another package: * /usr/local/lib/libz.a * -...

Is there a command I can use to determine how specific processes are swapping by PID?

I have an E450 with disks in 18 of the 20 internal slots. Using prtconf -vp | grep slot#, I have discovered the device IDs of the disks in slots 0-3 that are using the internal controller. The other disks are in use, but the slot #s are not showing up on this system. I'd like to figure out...

I have an E450 w/ 2GB of RAM in use. I'm looking at upgrading it to 4GB. Is there a way I can determine the density of the existing RAM/# of slots that are in use versus the number available without cracking the system open. Anyone know how I could determine this from the command-line? The...

I have an RMAN script setup to backup an Oracle database to an 'oracle' pool. 2 channels have been allocated and I'm backing up to a Legato server with 2 drives. I was expecting that each channel configured would go to seperate devices, but I'm seeing 2 'sessions' open up on a single drive for...

I have inherited a Legato setup with an L1000 w/ 30 tape slots and each tape has a capacity of 80GB. The configuration has 2 pools in use, Default and oracle. On the tapes in the oracle pool, I'm seeing anywhere from 80-105GB of data written to a full tape. On the Default pool, I am...