Search results for query: *

I'm trying to set something up here. We have two DSL lines as we have combined households. Here's the deal. Router/Gateway A (192.168.1.1) is connected and DMZd to a Cisco RVS4000 VPN router. Computers can go on the net and life is good. Router/Gateway B (192.168.2.1) when connected we get...

After researching on the web, I see the TN429 DIOD Pack can provide Caller ID. Can this pack work on a G3v6i.03.2.239.7? If so, any limitations/issues? If not, what options do I have for providing CID over LS trunks? Thanks,

I'm starting to take on a little project of tinkering with a Definity switch to learn it. I've got several 7444s, 8410s, and 8434Ds I've accumulated over the years. Im going to be given a Definity switch (it is an SCC type) so I decided to play arounf with it. I can punch the 25pair tails down...

Hi All, Is the Speech Recognition feature for the NAM activated by keycodes? I know it requires an MS-PEC card, but are any keycodes required as well? Currently, the option is greyed out in NVM Manager. NAM is 4.1, 16 channels; currently has 1 MS-PEC card. Do I need another card as well? Thanks.

I've got an extra NAM that has NVM 4.0 along with Cinphony ACD. I would like to convert this NAM to a ACD unit only. Does anyone have the steps to remove the NVM while leaving the Cinphony intact? I searched the FAQs and the web, but came up empty handed. Thanks.

I need to make a SDI break out cable (from backplane of M1 to SDI 0-1-2) to test and see if the Nortel cable is bad. Anyone have the pinouts from the 9 pin connector to the 3 different ports? I've tried searching, but came up empty handed (maybe bad search words). If anone has this, can they...

I've got a NAM that I just rebooted and now keeps coming up with 1762 Configuration has changed followed by another line 162 Configuration has changed. After numerous reboots, it's still there. Even an F1 to go into settings (BIOS) is not helpful as it wont even go to that screen. It is a V3G...

Anyone have any MAP files for 7.1 software? I upgraded a switch from 6.1 and can no longer access via NRU. Thank You.

We have a working CCR on our NAM 4.1. Can the CCR provide for dialing a 4 digit extension directly? I didn't see this anywhere in the docs, so I was wondering if there was some creative workaround. I would like to give callers the option to dial any 4 digit ext, or utilize the single digit...

While I know the 7410 CT is a piece of junk, I have a friend who insists on keeping it. Lately it seems the handset constantly scans and doesn't connect to the base to make calls. This can be fixed temporarily by unplugging the baase from the AC outlet and pluggin back in. After a while, it...

I have just taken over a sister site who also has an MICS 6.1, but there's a IDM 200 hanging on the wall with it. I can't find any docs on this beast anywhere (locally or on the net). Does anyone have any links to some? Looking to find out what exactly it does, how to program, etc. My...

What would be the easiest way to specify a two ring delay so that CID is delivered to the NAM. We use the AA feature of the NAM only for Night Service, so AutoAnswer is OFF in the NAM, since it is not to pick up during daytime; therefore the first port of the NAM is included in a Night Service...

Is there a way to monitor the channels on the NAM using a 7324 w/2KLMS ? The NVM DN is 2250, so I know I could create an Internal Autodial for DN 2250...but what about the 12 channels individually? I would just like to know how many VM channels are in use at any one time. Setup is: MICS 6.1...

Has anyone had any experience with running a Vonage VOIP line into a DS (or CI in this case) card? Does it act like a regular copper as far as users will see it? Does the CID work like telcos? We're thinking of dropping one of these puppies in and would like to know if it would play nicely...

Is there another way to get the s/n from an MLM007 aside from the label that's supposed to be affixed to the bottom of the module? Perhaps inside the card? I need to default this board from another location, but the old IT guy tore off the s/n sticker on the unit. I know how to default it, but...

Can anyone post (or e-mail if too sensitive) the default root password for the Unix/Xenix shell on the IS III? There are times when I would like to do the proper shutdown and can't due to lack of password. May e-mail to kkitti(at)pacbell(dot)net Thanks.

Recently upgraded MICS from 4.0 to 6.1 (Non XC) We've noticed that there are only 3 ring choices in the F*6. There used to be 4 in the 4.0 s/w. We have a mix of phones from m7100 up to m7324 w/KLMs. All phones only give 1,2,3 for a choice in the ring tones. What happened here? Anyone else...

I've got an older RAD left over from a pervious 616 system. I've got the NRU 10, can I use this to hook into the MICS (6.1 Non XC)? I plugged it into a station port on the MICS and I can access the RAD from any set. But I get errors when trying to connect thru PC. Do I need a FastRAD to use...

Can System Speed Dial Numbers be placed onto vacant buttons on users sets? (Like Avaya Merlin systems) System in question is Norstar MICS 6.1 (Non-XC)

OK, it looks like they're going to upgrade our MICS from 4.0 XC to 6.x (Non-XC). Since we already have the NVRAM cartridge in the slot, do we still need some procedure to preserve programming or is it just a matter of powering down, and swapping flash cards? We have no Companion sets on this...