Search results for query: *

after clustering a pair of ISG 1000 we can't get to an individual device as we can't get the mgt port to route. we have a seperate trust interface and see that the mgt port is in the trust vr. the untrust has routing to both interfaces. If i try an ping an external ip from the trust interface...

I'm sure this is a simple fix but it's driving me batty We have a Cisco AP1100. Configured with 2 vlans and each vlan has an associated SSID. The AP is connected to a Cisco router with DHCP on each of the vlans. Everything works as expected until we enable WEP. If I use the same key for both...

I know there has been a lot of threads on this subject, believe me I have read them all but I am still unable to make a 5610SW register correctly over our VPNs to remote sites. It connects fine on the LAN which leads me to the VPN. The phones can connect to the 406 and the file server/tftp and...

I hope this is an easy yes or no. I am new to the IP office system although I have managed to keep our current system running I was looking to make some improvements. I was wondering if it is possible to assign multiple extensions to a single phone. We use 5410 phones for all users. I can't seem...

I am currently a little confused. I have set up some software at a customer’s site that uses TCP port 443 to communicate with an application at a remote site. The local machine goes through an ISA Server. The connection is failing although I can connect to https websites. I can also telnet to...

I am having issues with layer one on the ATM 0 interface. Currently the interface is line down and protocol down when I connect them in the office. When I connect the routers to my ADSL at home they work fine. This was leading me to a fault on the ADSL line in the office. So called BT. they sent...

anyone herd of an application called BLOCKS ???for testing Bandwidth on leased lines

I am currently running a win2k domain with one PDC and 2 BDCs. On the PDC i have set the SNTP to time.windows.com and restarted the time service. after looking at the output of w32tm -once I can see that the time is being resolved correctly and is updating the PDC. When I look at a BDC or a...

I was wondering if anyone had experience in any third party integrated application that could monitor our website availability. Obviously we are able to monitor the availability of the server but not the actual website as this uses port 8080. I would be grateful for any help. Regards Dan

The aspnet user account and the IIS IWAM accounts are local machine account. On a Windows 2000 domain I want to define these accounts from specific servers as having the right to logon as a batch job and logon as a service in Group Policy, but they keep losing their effective priviledges on the...

I couldn't find any links related so here it is We have A 3640 router gonfigured for our IPT gateway. We have 2 PRI modules in the router. 1 configuered for incomming calls (30) from the PSTN. the second is configured for 16 channels outgoing. it uses mica modems and dilas out to services. The...

We currently have 5 devices sitting on our DMZ on a PIX 520. All devices are on the same subnet and connect through a switch on a single VLAN to the PIX. Each device has its gateway pointing to the PIX. When you ping from devices on the same DMZ segment they sometimes respond and sometimes...

A couple of weeks ago I tried uninstalling a Cisco VPN client on my windows 2000 workstation. The uninstall seemed to work o.k. but after rebooting the machine I was unable to resolve DHCP from my ADSL router. I fixed an IP address within the scope and I was able to ping the gateway so as far as...

I am setting up a PIX firwall for NMM but it requires a ICMP responce from the inside interface As of PIX ver 5.2.1 ICMP is not permitted on an interface. How can I configure the PIX to allow me to ping the inside interface? The PIX is running VER 6.2. I have enabled ICMP any any which allows...